Related Manuals for IXXAT CAN-CR210/FO
Summarization of Contents
Introduction to IXXAT CAN-Repeater
1.1 Overview of CAN-Repeater
General introduction to the IXXAT CAN-Repeater product family and manual.
1.2 Key Features
Lists key features of the CAN-Repeater models like power supply and interfaces.
1.3 Block Diagram
Illustrates the internal architecture and connectivity of the CAN-Repeater.
Indicators and Connections
2.1 Overview of Unit
Provides a visual overview of the CAN-CR200 unit's connectors and indicators.
2.2 Indicators
Explains the function of LEDs for power and CAN communication status, including error indications.
2.3 Connectors
Details pin assignments for power connector and Sub-D9M CAN bus interfaces.
2.4 CAN Bus Termination
Explains the feature for activating bus termination resistors via DIP switch for network integrity.
Configuration Settings
3.1 Bus Termination Resistors
Details how to configure bus termination using DIP switches for each CAN channel.
3.2 Baudrate Configuration
Explains how to set the CAN network baudrate using DIP switch S301 for optimal performance.
3.3 Lock Time Configuration
Describes how to set the lock time using DIP switch S302 to avoid bit errors caused by signal propagation.
Installation Procedures
4.1 Single Unit Mounting
Provides step-by-step instructions for mounting a single CAN-Repeater unit onto a DIN rail.
4.2 DIN Rail Bus Mounting
Explains how to mount the CAN-Repeater using the DIN rail bus extension feature for star topology.
Support and Returns
5 Support Information
Provides information for seeking support and FAQs on the IXXAT homepage.
6 Returning Hardware
Instructions for returning hardware, including downloading the RMA form.
Appendix
7.1 Technical Specifications
Lists detailed technical data, power consumption, dimensions, environmental ratings, and galvanic isolation.
7.2 Accessories
Details accessories like termination resistors, TBUS plugs, and glass fiber cables with order numbers.
7.3 EMI Hints
Provides advice on minimizing electromagnetic interference for proper operation and compliance.
7.4 Declaration of Conformity
Declares compliance with EC directives and lists applied harmonized standards.
7.5 Device Disposal
Information regarding the proper disposal of the electronic equipment according to regulations.
7.6 FCC Compliance
States compliance with FCC rules and provides Class A digital device instructions.
Need help?
Do you have a question about the CAN-CR210/FO and is the answer not in the manual?
Questions and answers