Related Manuals for IXXAT CAN-CR220
Summarization of Contents
Introduction
1.1 Overview
Provides a general introduction to the IXXAT CAN-Repeater and the manual's purpose.
1.2 Features
Lists the key features of the CAN-Repeater, including power supply and CAN bus interfaces.
1.3 Block diagram
Illustrates the internal architecture and interfaces of the CAN-Repeater device.
Indicators and connections
2.1 Overview
Provides a visual overview of the CAN-CR200's connectors and indicators.
2.2 Indicators
Explains the function of the LEDs on the CAN-Repeater for status indication.
2.2.1 Power-LED
Details the Power LED status, its meaning, and possible causes for issues.
2.2.2 CAN LEDs
Describes the CAN LEDs, their flashing modes, and what they indicate about CAN communication.
2.3 Connections
Details the different connectors on the CAN-Repeater, including power and CAN bus.
2.3.1 Power connector
Explains the pin allocation and wiring for the power connector.
2.3.2 CAN connector (Sub-D9M)
Details the pin allocation for the Sub-D9M CAN bus connectors.
2.3.3 DIN rail bus and TBUS plug
Describes the DIN rail bus interface and the necessary TBUS plugs for connectivity.
2.4 CAN bus termination
Explains the feature for adding bus termination resistors via DIP switch.
Configuration
3.1 Configuration of the bus termination resistors
Explains how to configure bus termination resistors using DIP switches for each CAN circuit.
3.2 Configuration of the baudrate
Details how to set the CAN network baudrate using DIP switch S301.
3.3 Configuration of the lock time
Explains how to set the lock time using DIP switch S302 for bit error avoidance.
Installation
4.1 Mounting a single CAN-Repeater
Provides step-by-step instructions for mounting a single CAN-Repeater unit.
4.2 Mounting with DIN rail bus support
Describes how to mount the CAN-Repeater using the DIN rail bus extension for star topology.
Appendix
7.1 Technical specifications
Lists detailed technical parameters of the CAN-Repeater, including power, dimensions, and environmental ratings.
7.2 Accessories
Describes available accessories for the CAN-Repeater, such as termination resistors and TBUS plugs.
7.2.1 CAN bus termination resistor
Details the IXXAT bus termination resistor accessory and its order number.
7.2.2 TBUS plug
Explains the TBUS plug accessory for connecting IXXAT devices via the DIN rail bus.
7.2.3 Glass fiber cable
Lists available glass fiber cable assemblies for interconnecting CAN-CR210/FO devices.
7.3 EMI Hints
Provides important hints for managing electromagnetic interference (EMI) for Class A devices.
7.4 Declaration of conformity
Declares that the products comply with EC directives and lists applied harmonized standards.
7.5 Note on disposal of used devices
Provides information on the proper disposal of electrical and electronic equipment.
7.6 FCC Compliance
States FCC compliance for the device and outlines conditions for operation and Class A digital device instructions.
Need help?
Do you have a question about the CAN-CR220 and is the answer not in the manual?
Questions and answers