Decor Therapy FR8709 Assembly Instruction

BEFORE YOU DO THE ASSEMBLY, PLEASE READ THIS ASSEMBLY INSTRUCTION
CAREFULLY, PLEASE FOLLOW THIS INSTRUCTION FOR ASSEMBLY TO AVOID
ASSEMBLY DIFFICULTY.
COMPONENTS:
1. Table Top
2. 3 Wooden Legs
3. Bottom Board
4. 3 Feet
Step 1.
Take all packaging off the table.Turn table top
upside down, so it is lying flat on the floor, make
sure the ground is clean and smooth.
Screw one leg to the bottom of the table top and
Step 2.
gently tighten the leg.Do not screw the leg too
Screw the other two wooden legs one by one to
Step 3.
the bottom of the table top and gently tighten the
legs. Do not screw the legs too tight.
Put the bottom board over the end of the three
Step 4.
legs, slightly adjust the wooden legs so the screw
holes on the legs are lined with the holes on the
bottom board.
Step 5. Slightly screw one foot through the bottom
board to connect with the wooden leg.
Step 6.
Slightly screw the other two feet one by one
through the bottom board to connect with the
wooden legs.
Step 7.
Now turn the table up to right side.If the table is
not stable enough,please adjust the legs and feet
to make it stable.
IF SPILLAGE OCCURS WIPE CLEAN WITH SLIGHTLY DAMP CLOTH IMMEDIATELY.
Half Round Table Assembly Instruction
WARNINGS!