Decor Therapy FR8659 Assembly Instruction

AVANT QUE VOUS FAITES L'ASSEMBLEE, S'IL VBOUS PLAIT LIRE CETTE ASSEMBLEE
INSTRUCTION SOIGNEUSEMENT, S'IL VOUS PLAIT SUIVRE A CETTE INSTRUCTION POUR
ASSEBLEE POUR EVITER ASSEMBLEE DIFFICULTE.
COMPOSANTS:
1. Table Top
2. 4 Wooden Legs
3. Bottom Shelf
4. 4 Feet
Step 1.
Take all packaging off the accent table.Turn table
top upside down, so it is lying flat on the floor,
make sure the ground is clean and smooth.
Slightly screw one leg to the bottom of the table top
Step 2.
and gently tighten the leg.Do not screw the leg too
tight.
Slightly screw the other three legs to the bottom of
Step 3.
the table top and gently tighten the legs.Do not
screw the legs too tight.
Put the bottom shelf over the end of the four legs,
Step 4.
slightly adjust the wooden legs so the screw holes
on the legs are lined with the holes on the bottom
Step 5. Slightly screw one foot through the bottom shelf to
connect with the wooden leg.
Step 6. Slightly screw the other three feet through the
bottom shelf to connect with the wooden legs.
Step 7. Now turn the table up to right side.If the table is
not stable enough,please adjust the legs and feet to
make it stable.
Please remove the "Legs Inside" tag from the knob
Step 8.
of the drawer after assembly.
IF SPILLAGE OCCURS WIPE CLEAN WITH SLIGHTLY DAMP CLOTH IMMEDIATELY.
Accent Table Assembly Instruction
WARNINGS!