Sideros DESIREE 860 Instructions For Use And Maintenance Manual

Sideros DESIREE 860 Instructions For Use And Maintenance Manual

Advertisement

DESIRÉE 760
&
DESIRÉE 860
Instructions for use
and maintenance
GOOD WARMTH

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DESIREE 860 and is the answer not in the manual?

Questions and answers

Summary of Contents for Sideros DESIREE 860

  • Page 1 DESIRÉE 760 & DESIRÉE 860 Instructions for use and maintenance GOOD WARMTH...
  • Page 2: Table Of Contents

    Some suggestions for a good flue BEFORE INSTALLATION Thank you for choosing a SIDEROS product. All parts of this product have been carefully made with the aim of meeting all safety and functional requirements. To avoid any unpleasant problems and to make best use of this appliance, please read this booklet carefully.
  • Page 3: Accessories

    - protective glove - additional documentation (Guarantee, flue booklet, ANFUS booklet, guarantee centres booklet) N.B.: The additional documentation should be read and kept! TECHNICAL DATA TAB. 1 Sideros S.p.A. Manufacturer: 41038 San Felice S/P (Italy) Model: DESIRÉE 760 DESIRÉE 860...
  • Page 4 FIG. A Grate shaker The firebox has a panoramic door with ceramic glass that withstands high temperatures (700°C). With this solution, we wanted to offer the visual appeal of flames inside the firebox without any danger of sparks or smoke escaping into the heated room.
  • Page 5 FIG. B FIG. C PRIMARY AIR PRIMARY AIR CLOSED FULLY OPEN The secondary air valve (FIG. D) is above the firebox door and allows air to come in from the top of the firebox, substantially improving combustion. This second intake of air also helps keep the glass of the firebox door clean.
  • Page 6: Installation Instructions

    FIG. E FIG. F Smoke control Smoke control valve knob valve knob Open position Closed position !Beware!: To change the smoke valve knob from one position to the other, press it in towards the stove, then turn it clockwise to move from closed to open, and vice versa, it is necessary to turn it anticlockwise to close the valve.
  • Page 7: Assembling The Cover (Optional)

    KEY: (1) L Handrail, (2) R Handrail, (3) Handrail Pin, (4) Handrail Bush, (5) M5 Grub Screw. ASSEMBLING THE COVER (OPTIONAL) 1 - FRAME 2 - COVER 3 - PINS TO FASTEN THE COVER 4 - HH SCREWS M 6x20 5 - M6 CAP NUTS To attach the cover to the frame of the stove, proceed...
  • Page 8 - Ensure that the place or room where the stove is to be installed is adequately ventilated (see ch. 2.5). - Once the best position has been determined, unpack the stove removing the cardboard and the internal protective material. - Check that the doors open and close properly. (Desirée 860 Version) FIG.
  • Page 9: Connection To The Flue

    CONNECTION TO THE FLUE It is good to remember at all times that it is at least as important that the flue works correctly and is used safely as that the stove does. Ensure that the flue draught is between 0.10 mbar and 0.15 mbar, if it should be lower, check that it complies with current rules (UNI EN 1443 and UNI EN 10683).
  • Page 10: Room Ventilation

    TAB. 2 STOVE MODEL DESIRÉE 760 DESIRÉE 860 Rated output 6.5 kW 7 kW Flue temperature 190 °C 200 °C Negative flue pressure at 0.12 mbar 0.12 mbar max output Room heating capacity (for buildings whose insulation does not meet heat protection regulations).
  • Page 11: Lighting The Stove

    TAB. 4 TYPE OF FUEL N° Pieces 2 medium DESIRÉE 760 3 small Wood 2/3 medium DESIRÉE 860 2.25 3/4 small LIGHTING THE STOVE The lighting stage is very important especially the first few times. To carry out this stage properly, follow the following rules: - open the windows or ensure good ventilation in the room somehow;...
  • Page 12: Operation In The Transitional Period

    OPERATION IN THE TRANSITIONAL PERIOD During the low season, the draught can be compromised in view of the fact that external temperatures can easily go above 15°C the point when it is advisable to clean the grate properly before lighting in order to have a better flow of air below the grate. In addition, to ensure the stove works better it is preferable to use less wood, to clean the grate frequently with the poker and rekindle the embers by using the grate shaker.
  • Page 13: Cleaning And Maintaining The Flue

    CLEANING AND MAINTAINING THE FLUE Every year, normally before the autumn, it is necessary to have the flue cleaned by a qualified person to remove soot deposits, unburnt oils and other possible obstructions that might have developed and to check the condition of the flue itself (for possible holes, cracks, infiltrations, etc.).
  • Page 14 - have no more than three changes of direction, including the connection to the flue inlet, made with internal angles of not less than 90°. The changes of direction must be made using only curved elements. - have the final length to the flue inlet perpendicular to the opposite internal side of the flue;...
  • Page 15 Blank page...
  • Page 16 PEOPLE, ANIMALS OR THINGS CAUSED BY NOT ABIDING BY THE GENERAL SAFETY STANDARDS AND THE INSTRUCTIONS FOR USE, CLEANING AND MAINTENANCE PRESENTED IN THIS MANUAL Sideros S.p.A. Via dell’Industria, 87 41038 San Felice sul Panaro MODENA ITALY Tel. 0535/8.66.11 Fax. 0535/8.66.45 E-mail: info@sideros.com...

Table of Contents