Related Manuals for Simpson GCN-MEP
Summarization of Contents
Safety and Responsibilities
Operator Training and Manual Understanding
Simpson Strong-Tie recommends obtaining training and reading the manual. Obtaining training is the user's responsibility.
User Responsibility and Limitations
Manuals and instructors cannot cover all situations; safe reaction is the user's responsibility. Simpson disclaims responsibility for disregard of instructions.
Safe Handling Practices
Tool and Fuel Cell Handling Precautions
General safety rules for handling the tools and fuel cells, including pointing away from people and using PPE.
Base Material Evaluation
Material Suitability and Testing
How to test base material suitability and thickness before fastening, including unacceptable materials.
Unsuitable Materials for Fastening
A list of materials that are unsuitable for use with these gas-actuated tools.
Base Material Thickness and Condition
Guidelines on the required thickness and condition of base materials for safe fastening.
Safe Fastening Guidelines
Fastening Rules and Precautions
Rules for safe fastening, including tool angle, fastener placement, and material conditions.
Pre-Loading Procedures
Steps and precautions before loading fasteners and fuel cells into the tool.
Proper Fastening Principles
Fastening into Concrete and Masonry
Suitable concrete and masonry materials, factors affecting holding power, edge distance, spacing, and thickness.
Fasteners and Fuel Cells
Fastener Types and Specifications
Details various GDP pins, step-shank pins, spiral-knurled pins, and MEP pins with specifications.
Fuel Cell Details
Details gas fuel cells, including model numbers, pack quantities, and compatible tools.
GCN150 Magazine Loading
Loading GDP Strip Pins
Step-by-step instructions with images on how to load GDP strip pins into the GCN150 magazine.
GCN-MEP Operation Modes
Loading Preassembled Fasteners
Instructions for loading single-shot preassembled fasteners into the GCN-MEP tool.
Converting to Magazine Tool
Step-by-step guide with images on how to attach the magazine to the GCN-MEP tool.
GCN-MEP Magazine Loading
Loading GDP Strip Pins
Step-by-step instructions with images for loading GDP strip pins into the GCN-MEPMAG magazine.
Fuel Cell Installation
GFC34 Fuel Cell Preparation and Install
Detailed instructions with images on how to prepare and install the GFC34 fuel cell into the tool.
Tool Power and Adjustments
Battery Installation and Charging
Instructions for installing the battery and understanding the charge indicator light.
Depth Control Dial Operation
How to use the depth control dial to adjust fastener embedment depth.
Tool Accessories
Extension Pole Boot Installation
Instructions for attaching the tool boot for use with an extension pole.
Optional Tool Foot Installation
Instructions for installing an optional rear foot for improved tool stability.
Troubleshooting Guide
Problem Resolution Steps
A table listing common symptoms, their causes, and suggested solutions for tool malfunctions.
Product Kit Contents
Nailer Kit Components
Lists components included in the GCN-MEPKT/GCN150KT nailer kit.
Magazine Kit Components
Lists components included in the GCN-MEPMAGKT nailer kit.
Extension Pole Kit Components
Details the parts and extensions available for the extension pole kit.
Limited Warranty Information
Warranty Terms and Disclaimers
Outlines the one-year limited warranty, disclaimers, and limitations of liability for the tools.
Need help?
Do you have a question about the GCN-MEP and is the answer not in the manual?
Questions and answers