Related Manuals for Shark 100
Summarization of Contents
Customer Support and Warranty Information
Customer Service Details
Provides contact information and operating hours for customer support.
Product Warranty Terms
Outlines the warranty period and conditions for the meter.
Operational Guidelines and Safety Precautions
Product Usage and Calibration
Covers product use, calibration statement, and disclaimer information.
Safety Warnings and Symbols
Highlights important safety warnings and symbols used in the manual.
Chapter 1: Three-Phase Power Measurement
System Configurations and Concepts
Explains Wye/Delta connections, power, energy, demand, and power factor.
Key Electrical Measurements
Differentiates and explains power, energy, demand, reactive power, and power factor.
Chapter 2: Meter Overview and Specifications
Hardware Features and Models
Details the physical components, models, V-Switch technology, and measured values.
Model Selection and Compliance
Guides users through selecting the correct model number and options.
Meter Measured Values and Specifications
Lists all measurable parameters and their technical specifications.
Compliance and Accuracy Standards
Details the regulatory compliance and accuracy standards met by the meters.
Chapter 3: Mechanical Installation
Mounting Methods and Procedures
Covers ANSI, DIN rail, and transducer mounting steps and considerations.
Shark® 100T Transducer Mounting
Specific guidance for mounting the Shark® 100T transducer.
Chapter 4: Electrical Installation
Safety and Wiring Considerations
Emphasizes safety, CT leads, voltage, power supply, and grounding connections.
Electrical Connection Diagrams
Visual guides for connecting the meter in various electrical configurations.
Chapter 5: Communication Installation
RS485 and Unicom 2500 Setup
Instructions for RS485 communication and using the Unicom 2500.
Shark® 100 Ethernet Configuration
Guides for setting up Ethernet communication for the Shark® 100.
Connecting via Communicator EXTTM Software
Detailed steps for establishing software connection to the meter.
Chapter 6: Using the Shark® 100/50 Meter
Front Panel Operation and Navigation
Guides on using the front panel buttons, menus, and modes for operation.
Meter Configuration and Settings
Covers using configuration mode, scroll feature, CT/PT settings, and ports.
Key Operational Features and Testing
Explains load bar display and accuracy testing procedures.
Software Programming and Device Profile
Instructions for connecting and configuring via software and device profile.
Chapter 7: Using the Shark® 100B Meter
BACnet Configuration and Web Interface
Guides for network setup, web interface access, and BACnet configuration.
BACnet Objects and Data Mapping
Lists and describes BACnet objects and their associated data.
Appendix A: Meter Navigation Maps
Front Panel Navigation Flowcharts
Visual maps for navigating meter menus, modes, and screens.
Reset and Configuration Navigation
Visual maps for navigating reset and configuration modes.
Appendix B: Modbus Register Maps
Modbus Register Details and Formats
Outlines register sections, data formats, and floating point values.
Appendix C: Shark® 100 Meter DNP Map
DNP Protocol Mapping Overview
Details DNP protocol structure and mapping for the Shark® 100 meter.
Appendix D: DNP 3.0 Protocol Assignments
DNP Layers and Object Definitions
Covers DNP layers, function codes, objects, and variations for the meter.
Appendix E: USB to IrDA Adapter Installation
Adapter Installation Guide
Step-by-step instructions for installing the USB to IrDA Adapter and its driver.
Need help?
Do you have a question about the 100 and is the answer not in the manual?
Questions and answers