6.9.2
ASSIGN EXTENSION (S) TO ACCESS ONLY A DESIGNATED CO LINE FOR
EXTERNAL CALLS
Format:
* 4 2 m abc #
m = CO line port number;
abc = extension number
Description: Assign extension to use only a designated CO line for external calls. Even if other
CO lines are free, this extension cannot access them for external calls.
Example: Assign extension 807 to use CO line 2 only, and extension 808 to use CO line 3 only
•
These extensions can only use the designated CO line for external calls; they cannot
access other CO lines, even if other CO lines are free.
•
To cancel this setting, reset the CO line (see paragraph 6.5).
6.10 EXTENSION NUMBER ASSIGNMENT
6.10.1
CHANGE EXTENSION NUMBER
Format: * 7 abc ABC #
abc = previous extension number
ABC = new extension number
Description: Allows you to change the numbers of the extensions
Example: Change extension number 804 to 537; 802 to 881; 806 to 652
•
Available extension numbers are between 100 and 999
•
The new extension number cannot as the same as an existing extension number
33