Table of Contents
Advertisement
6.6
RINGING EXTENSIONS ASSIGNMENT
6.6.1
RINGING EXTENSIONS ASSIGNMENT FOR EXTERNAL (CO) LINES
Format:
* 1 m abcd #
m = CO line port number
abcd = last digit of extension port (Default setting = Ext. 801 to 804)
Description: You can select which extension(s) ring when there is an incoming call on an
external CO line.
Example: Assign extension 802 to ring when there is an external call on CO line 1.
Assign extension 803 and 806 to ring when there is an external call on CO line 2.
•
The ringing extensions can only be assigned among extensions 801 to 808
•
The CO line port must be in operator mode
6.6.2
RINGING EXTENSIONS ASSIGNMENT FOR DOOR PHONE
Format:
* 14 abcd #
abcd = last digit of the ringing extensions
Description: Assign extensions which will ring when the Door Phone is activated
Example: Assign extension 802, 803 & 807 to ring when the Door Phone is activated
If a visitor lifts the Door Phone receiver, extensions 802, 803, & 807 will ring at the same time.
Any extension is able to answer the Door Phone. If not ringing, use Call Pick-Up.
28
Advertisement
Table of Contents
