Lexicon PCM 80 User Manual page 6

PCM 80 Vocal Fix User Guide
1-2
MIDI SysEx register dumps require that the algorithm card used to create
the effect(s) be loaded.
Be aware that, if you create a bank of registers with effects created from more
than one algorithm card, you will need to perform separate SysEx dumps for
each card used.
The algorithm used to create an effect must be loaded into the PCM 80 for a
SysEx dump to occur. If you do not have the appropriate algorithm card loaded
into the transmitting PCM 80, the data for the effect is not transmitted and the
following message is displayed:
If you do not have the appropriate algorithm card loaded into the receiving PCM
80 when a valid SysEx for an effect created from a card algorithm is received,
the following message is displayed:
A placeholder is transmitted for any register which cannot be dumped due to the
absence of an algorithm card. This placeholder contains the program name and
algorithm number, but no effect parameter data. This allows an editor to identify
registers which were not sent, and the algorithm card which must be loaded to
complete the dump. The PCM 80 will always ignore the placeholder, and will
display the following message when a placeholder is received:
Note that registers made from algorithm cards can be freely copied between the
PCM 80's internal register bank (R) and RAM card banks (C0, C1, etc.) without
loading the algorithm card.
Can't dump effect
Need algorithm card
Effect unchanged
Need algorithm card
Effect unchanged
No data in dump
Lexicon