Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for kala Sirocco 1600
Summarization of Contents
Control Panel
Control Panel Overview and Functions
Detailed description and functions of the control panel buttons and indicators.
Warranty and Return Policy
Warranty Terms and Conditions
Details warranty coverage against defects and specifies exclusions.
Return Procedures and Regulations
Outlines the process for returning the machine, including packaging and transport damage considerations.
Installation and Safety Guidelines
Pre-Installation Checks and Precautions
Covers electrical checks, installation location, and handling safety before operation.
1 Reception of the SIROCCO
1-1 Working Space Selection
Choosing an appropriate working area for machine setup and operation.
1-2 Machine Unpacking
Procedure for safely removing the machine and accessories from the packing case.
1-3 Support Unit Assembly
Instructions for assembling the machine's support unit using provided parts.
1-4 Positioning on Support Unit
Guidance on safely placing the laminator onto its support unit, noting weight requirements.
1-5 Start-up Kit of Films
Details on the contents of the start-up kit for films.
2 Programming Speed and Temperature
2-1 Automatic Stand-by Mode
Description of the automatic stand-by function and setting its temperature.
2-2 Speed Programming
Instructions on how to set and adjust the roller speed using the control panel.
2-3 Temperature Programming
How to adjust and set the roller temperature and monitor heating status.
3 Roller Pressure Adjustment
Adjusting Roller Space and Pressure
Procedure for adjusting the space between rollers and their pressure for thick supports.
5 Hot Lamination
5-1 Feeding the Film
Steps for powering on the machine and feeding the film for lamination.
5-2 Changing Film Rollers
Instructions for safely stopping the machine and replacing worn film rollers.
5-3 Ventilator Use
Guidance on using the ventilators for cooling films during thick document lamination.
6 Cold Lamination
6-1 Single-Side Lamination
Steps for setting up and performing single-sided cold lamination.
6-2 Single-Side and Simultaneous Adhesive Application
Procedure for performing cold lamination with simultaneous adhesive application.
6-4 Mounting and Sticking on Adhesive Support
Instructions for mounting documents onto an adhesive support.
6-5 Simplification of Utilization
Methods to simplify the utilization of the laminator.
A - Blocking Ring
Description and use of the blocking ring to prevent axle shrinking.
B - Rewinder (Optional)
Instructions for installing and using the optional rewinder.
C - Pedal Control Use
How to use the pedal control for advancing rollers and guiding documents.
7 Adjustment
Cold Lamination Settings
Recommended speed and pressure settings for cold lamination of various materials.
8 Technical Characteristics
SIROCCO 1080 Specifications
Detailed technical specifications for the SIROCCO 1080 model.
SIROCCO 1600 Specifications
Detailed technical specifications for the SIROCCO 1600 model.
9 Maintenance and Safety
9-1 Routine Maintenance Schedule
Schedule and actions for routine cleaning and maintenance of the laminator components.
9-2 Weekly Safety Test
Procedure for testing the emergency stop buttons for safety compliance.
11 Incidents and Troubleshooting
Lamination Failure Analysis and Solutions
Identifies common problems, their causes, and solutions for lamination failures.
Need help?
Do you have a question about the Sirocco 1600 and is the answer not in the manual?
Questions and answers