Lexicon MPX 1 - MIDI IMPLEMENTATION DETAILS Midi Implementation Manual page 51

MPX 1 MIDI Implementation Details Lexicon
program_bank
This is the program bank that is set when controller 32 (Bank Select) is sent to the box. This is used to
offset incoming standard program change messages by 0, 100 and 200 when set to 0, 1, and 2
respectively.
current_effect_edit_parameter
This contains the parameter number of the effect edit menu. Note that this is really only significant when
in the EDIT mode with effect parameters visible because of an "effect_matrix" that contains the current
positions in each effect's menu. "current_effect_edit_parameter" is only the currently displayed version.
The "effect_matrix" is not accessible via MIDI.
cur_alg_select
This contains the current value of the effect (algorithm) select menu. When displayed, this translates into
the algorithm number for the selected effect.
cur_internal_cont_param_num
cur_internal_cont
not used
compare_mode
This contains the current "compare mode" for the system (1 = on, 0 = off).
dbase_edit_cur_choice
This contains the current choice for the "Database" menu.
soft_val_play_cur_choice
This contains the current choice for the "Soft Row" menu when accessed via the Program mode.
soft_val_cur_choice
This contains the current choice for the "Soft Row" menu when accessed via the Edit mode.
soft_val_edit_cur_choice
This contains the current choice for the "Soft Row Edit" menu when accessed via the Program mode.
current_map_block
This contains the current effect block being edited in the "Audio Routing" menu. Note that block number
0 is ALWAYS the input and block number 8 is always the output.
cur_routing_item
This contains the current effect block being edited in the "Audio Routing" menu OPTION. Again, block
number 0 is ALWAYS the input and block number 8 is always the output.
cur_map_screen
not used
order_cur_choice
This contains the current effect block being moved in the "Effect Order" menu.
mix_cur_choice
This contains the current active position in "Mix" menu. (range: 0-13)
patch_cur_choice
This contains the current patch number being edited in the patch menu (range:0-4)
48