Table of Contents
Advertisement
DE-528CT Ethernet Adapter / User s Guide
5
C
ONFIGURATION AND
D
IAGNOSTICS
The DE-528CT adapter will be automatically configured when the
computer is powered on.
Run the SETUP.EXE configuration and diagnostics program to verify
configuration of the DE-528CT as set by the installation procedure, and
assist with isolation of any faults in operation.
These procedures are
optional, and will only be useful in the unusual event that there is a fault,
such as an interrupt number conflict among your computer s expansion
cards. If your installation provides normal operation, you might choose to
skip these procedures.
Starting the Setup and Diagnostic Program
Insert the DE-528CT Installation program diskette in an available diskette
drive (here shown as drive A). At the DOS prompt (here shown as > ),
key in:
and press Enter
> A : SETUP
The Main Menu dialog box appears.
Then follow the instructions on the screen. Note that you can get help or
quit the Setup and Diagnostics program at any time by pressing F1 or Esc
respectively.
Hide quick links:
Advertisement
Table of Contents
