Qos - TP-Link TL-PA101 User Manual

Set Local Device Only: Click this tab to change the network name of the local Powerline Ethernet
Adapter device only. All Powerline Ethernet Adapter devices seen on the Main configuration
homepage prior to this will be no longer present in the new network, effectively making the local
devices not to communicate to the devices who were in the old logical network. Devices previously
set up with the same logical network (same network name) will appear in the device list afterward
selecting this option.
Set All Devices: The Set All Devices button is used to change the logical network of all devices that
appear on the Main configuration homepage whose Device's Password had been entered for the
same logical network. A dialog window will appear to report the success of this operation. For
devices whose device passwords were not entered, this operation will fail and will report a failure
message.

4.3 QoS

The third tabbed window, labeled 'QoS' for Quality of Service, is shown in Figure.
TL-PA101 85Mbps Powerline Ethernet Adapter
13