Hitachi CP-X430 series User Manual
Liquid crystal projector
Hide thumbs
Also See for CP-X430 series:
- User manual (39 pages) ,
- User manual (40 pages) ,
- Specifications (2 pages)
Table of Contents
Related Manuals for Hitachi CP-X430 series
Summarization of Contents
Before Use Procedures
Contents of Package
Lists items included in the projector package.
Part Names Identification
Identifies components of the projector.
Loading Remote Batteries
Instructions for installing batteries in the remote control.
Installation Guide
Projector and Screen Placement
Guidance on projector placement relative to the screen.
Angle Adjustment
How to adjust the projector's tilt using foot adjusters.
Cabling Connections
Details on connecting various cables to the projector.
Power Connection
Instructions for connecting the power cord.
Plug & Play Setup
Information on VESA DDC compatibility for plug and play.
Operations and Controls
Power ON/OFF Procedure
Steps to turn the projector on and off.
Basic Operation Guide
Overview of fundamental projector controls and functions.
Setup Menu Options
Details on image and video adjustments.
Input Menu Settings
Settings related to input signals and sources.
Image Menu Customization
Options for customizing screen display and image settings.
Options Menu Configuration
Configuration for system options like volume, language, and auto-off.
No Signal Menu Options
Settings available when no signal is detected.
Maintenance Procedures
Lamp Maintenance
Information and warnings regarding lamp replacement and life.
Replacing the Lamp
Step-by-step guide for replacing the projector lamp.
Resetting the Lamp Timer
Procedure to reset the lamp usage timer after replacement.
Air Filter Maintenance
Instructions for cleaning and replacing the air filter.
Other Maintenance Tasks
General maintenance advice, including lens and cabinet cleaning.
Troubleshooting Guide
OSD Message Troubleshooting
Explains on-screen messages and their causes/solutions.
Indicator Status Messages
Interprets status lights (POWER, LAMP, TEMP) and their meanings.
Symptom-Based Troubleshooting
Lists common issues and their potential causes and remedies.
Technical Information
Dimension Diagram
Visual representation of projector dimensions.
Signal Connector Pin Assignments
Pinouts for various projector connectors.
Computer Signal Compatibility
Lists compatible computer signal resolutions and display modes.
Initial Set Signals
Horizontal and vertical signal timing specifications for initial setup.
Mouse Control Connection
How to connect and use the projector's mouse control function.
RS-232C Communication Protocol
Details on projector communication via RS-232C and command operations.
RS-232C Command Operations
Procedures for requesting status, changing settings, and controlling the projector via RS-232C.
Command Data: Blank Color & Mirror Settings
Command codes for blank color and mirror image settings.
Command Data: Freeze & Menu Color Settings
Command codes for freeze and menu color settings.
Command Data: Startup & Language Settings
Command codes for startup screen and language settings.
Command Data: Magnify & Auto Off Settings
Command codes for magnification and auto-off settings.
Command Data: Reset & Input Source Settings
Command codes for resetting settings and selecting input sources.
Command Data: Volume & Power Settings
Command codes for volume, power, and error status.
Command Data: Image Adjustments
Command codes for sharpness, color, and tint adjustments.
Command Data: Video & HDTV Settings
Command codes for video format and HDTV mode settings.
Command Data: Picture-in-Picture Settings
Command codes for PiP size, position, audio, and input.
Command Data: Signal & Gamma Settings
Command codes for Sync on G, Whisper, and Gamma settings.
Command Data: IR Remote Control Settings
Command codes for IR remote sensor activation.
Regulatory Notices
FCC Statement Warning
Compliance information and warnings regarding FCC regulations.
Notice for Canadian Customers
Specific notice for Canadian users regarding ICES-003 compliance.
Need help?
Do you have a question about the CP-X430 series and is the answer not in the manual?
Questions and answers