Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for lifeSMART Coronado
Summarization of Contents
Spa Dimensions and Specifications
Model Dimensions Overview
Lists various spa models with their seating, dimensions, and dry weight.
Important Pre-Operation Warnings
Read Manual First
Emphasizes reading the manual before operating the spa.
Local Regulations Compliance
Advises checking local regulations for construction and safety permits.
Safety Information - Child Safety
Preventing Child Drowning and Injury
Instructions and warnings to prevent child drowning and injury around the spa.
Safety Information - Electrical Hazards
Grounding and Cord Safety
Precautions against electrocution, including grounding and cord safety.
Electrical Safety - GFCI and 230V
115V GFCI Testing Procedure
Procedure for testing the Ground Fault Circuit Interrupter on 115V models.
230V Power Supply Requirements
Detailed requirements for 230V power supply, grounding, and circuit breakers.
Appliance Proximity Warning
Guidelines on placing electrical appliances near the spa to avoid hazards.
General Spa Safety Practices
Preventing Physical Injury
Warnings about sitting in filter areas, slippery surfaces, and moving parts.
Health and Medication Risks
Risks associated with medication use, alcohol, and pre-existing health conditions.
Water Quality and Filter Care
Guidelines for maintaining proper water chemistry and filter maintenance.
Health Risks - Hyperthermia and Burns
Hyperthermia Prevention Tips
Information on preventing hyperthermia and recommended water temperatures.
Skin Burn Prevention
Advice on checking water temperature to prevent skin burns.
Spa Usage and Care Guidelines
Key instructions on spa cover use, maintenance, and avoiding damage.
INSTALLATION - Location and Foundation
Planning Your Spa's Location
Factors to consider when choosing a location for the spa.
Ensuring Service Accessibility
Ensuring accessibility for maintenance and repairs.
Importance of a Solid Foundation
Importance of a solid foundation for spa support and stability.
INSTALLATION - Foundation and Placement
Foundation Support Responsibility
Owner's responsibility for proper foundation support, not covered by warranty.
Indoor Installation Considerations
Special considerations for installing a spa indoors, including moisture and ventilation.
Spa Placement and Delivery Route
Steps for physically moving and positioning the spa, considering delivery path.
EQUIPMENT ACCESS
Accessing Spa Equipment
Instructions on how to remove panels to access spa equipment.
ELECTRICAL REQUIREMENTS - General
Electrical Shock Warning
Crucial warnings about electrical connections and potential shock hazards.
115V Power Supply Setup
Specific requirements for 115V power supply and outlet installation.
230V Power Supply Setup
Detailed requirements for 230V power supply, grounding, and circuit breakers.
ELECTRICAL REQUIREMENTS - 230V Specifics
Hardwiring for 230V Spas
Emphasizes hardwiring for 230V spas and warns against extension cords.
Wire Size and Grounding
Guidelines on wire size, type, and grounding connections for 230V systems.
User Serviceable Parts Warning
Caution against servicing electronic components without professional help.
ELECTRICAL REQUIREMENTS - Configuration
GFCI Circuit Breaker Mandate
Mandates a new GFCI circuit breaker for spa installation.
System Voltage and Dip Switches
Instructions for configuring the 230V power system and using dip switches.
Operational Mode Selection
How to change operational modes via dip switch #7.
ELECTRICAL REQUIREMENTS - Wiring Diagram
230V Wiring Diagram Overview
Visual guide for connecting the spa's 230V power supply.
GFCI Tripping Troubleshooting
Note on checking the neutral wire if the GFCI breaker trips.
CONTROL PANEL OPERATION - Basics
Initial Startup and Auto-Heating
How the spa heats automatically upon initial power-up.
Adjusting Water Temperature
Steps to change the desired water temperature using control buttons.
Operating the Jets
How to turn jets on and off, and pump behavior during heating.
Using the LED Light
Controls for the spa's LED lighting system.
CONTROL PANEL OPERATION - Modes and Cycles
Standby Mode Functionality
How to put the spa into standby mode and its implications.
Spa Operational Modes
Details on Standard, Economy, and Sleep modes for the Coronado model.
Configuring Filter Cycles
Information on how to program filter cycle durations.
Freeze Protection Mechanism
How the spa automatically protects against freezing.
CONTROL PANEL OPERATION - Display Messages
Display Codes for Specific Models
Explains error codes and status messages for specific models.
Coronado LCD Diagnostic Codes
Interpretation of diagnostic messages on the Coronado model's LCD.
Overheat Condition Resolution
Actions to take when the spa indicates an overheat condition.
CONTROL PANEL OPERATION - Error Codes
Sensor Malfunction Codes
Explains codes related to sensor malfunctions (SA, Sb, Sn).
Flow and Water Level Error Codes
Interprets codes for flow problems (HL, LF, Dr, dY) and required actions.
COMPONENT OPERATION
Air Control Valve Usage
How to use the air control valve to adjust jet pressure.
Hydrotherapy Jets Adjustment
Instructions for operating and adjusting the hydrotherapy jets.
Ozone Generator Functionality
Information on the ozone system and its role in water sanitation.
Waterfall Feature Operation
How to operate the waterfall feature if equipped.
FILL UP AND START-UP INSTRUCTIONS
Filling the Spa with Water
Step-by-step guide for filling the spa with water and checking for leaks.
Applying Power and Initial Test
Procedure for connecting power and initial spa activation.
ADDING START-UP CHEMICALS
Water Chemistry Balancing Steps
Step-by-step process for balancing pH, alkalinity, and calcium hardness.
Sanitizing and Shock Treatment
Instructions for adding chlorine sanitizer and performing weekly shock treatments.
SPA MAINTENANCE - Filters and Surfaces
Filter Cartridge Cleaning Guide
How to clean and maintain the spa's filter cartridge for optimal performance.
Surface Cleaning Methods
Recommended methods for cleaning the spa's surface.
Spa Cover Maintenance
Tips for cleaning and maintaining the spa cover.
Cabinet Cleaning Advice
Guidance on cleaning and protecting the spa's cabinet.
LED Light Replacement Guide
Instructions for replacing the spa's LED light.
DRAINING OR WINTERIZING SPA
Draining Procedure
Procedure for draining the spa for maintenance or seasonal storage.
Winterizing Procedure
Steps to prepare the spa for winter to prevent freeze damage.
TROUBLESHOOTING PROCEDURES
No Component Operation Fixes
Steps to diagnose and fix issues where no spa components are working.
Pump and Jet Action Issues
Troubleshooting for pump not operating or poor jet action.
Overheating and Temperature Fixes
Solutions for dealing with water that is too hot or causing overheat messages.
REPLACEMENT PARTS LIST
Available Spa Component Parts
A list of part numbers and descriptions for common spa components.
Need help?
Do you have a question about the Coronado and is the answer not in the manual?
Questions and answers