Related Manuals for Kärcher HDS 695 S
Summarization of Contents
Apparatus Overview
Operating Components
Identifies and describes the machine's parts and controls.
Initial Setup and Operation
Check Oil Level
Procedure to verify and top up the engine oil.
Refill Fuel
Instructions for safely refilling the fuel tank with appropriate fuel.
Refill Detergent
Guidelines for refilling the detergent tank with Kärcher products.
Water Connection
Instructions for connecting the water supply to the machine.
Power Connection
Guidance on connecting the machine to the electrical power supply.
Machine Operation
Connect Appliance
Steps to switch on the machine and check indicator lights.
Adjust Cleaning Temperature
How to set the desired cleaning temperature using the regulator.
Adjust Pressure and Flow Rate
Instructions on adjusting pressure and flow using the machine or spray gun.
Dose Detergent
How to adjust detergent concentration using the dosing valve.
Cleaning Procedures
Cold Water Service
Cleaning with cold water, including pressure adjustment.
Hot Water Service
Cleaning with hot water, including temperature settings.
Steam Service
Operating in steam mode, including nozzle selection and pressure limits.
Post-Service Procedures
Safety After Hot Water/Steam Service
Warning about hot water and cooling the machine before handling.
Detergent System Flush
Procedure to flush the system with clean water after detergent use.
Appliance Disconnection
Steps for safely shutting down and disconnecting power and water.
Appliance Shutdown and Storage
Water Drainage Procedure
Instructions for completely emptying the machine of water.
Antifreeze Protection
Procedure to protect the machine from freezing; frost destroys units not completely free of water.
Routine Maintenance
Maintenance Safety and Preparation
General safety precautions and preparation steps before performing maintenance.
Maintenance Intervals
Recommended schedule for routine maintenance tasks by frequency.
Maintenance Procedures
Detailed steps for cleaning filters and changing oil.
Problem Solving Guide
Indicator Light Issues
Problems indicated by fuel, ready, or descaler control lights.
Operational Faults
Steps for when the machine does not work or generate pressure.
Leak and Cycling Problems
Troubleshooting leaks and intermittent pressure cycling.
Detergent Uptake Issues
Steps to resolve problems with detergent uptake.
Product Warranty Information
Warranty Information
Information regarding the product warranty terms and conditions.
General Product Information
Safety Features Overview
Explanation of built-in safety features like overflow valves and water shortage protection.
High-Pressure Ejector Safety
Safety directives and inspection requirements for high-pressure liquid ejectors.
Need help?
Do you have a question about the HDS 695 S and is the answer not in the manual?
Questions and answers