KL Industries Bass Hound 10.2 Owner's Manual
  1. Manuals
  2. Brands
  3. KL Industries Manuals
  4. Boat
  5. Bass Hound 10.2
  6. Owner's manual

KL Industries Bass Hound 10.2 Owner's Manual

Fishing boat
Hide thumbs
Table of Contents

Advertisement

Quick Links

Enlarged version
FISHING BOAT
OWNER'S MANUAL
Bass Hound™ 9.4
Bass Hound™ 10.2
Bass Hound™
9.4
KL Industries, Inc.
1790 Sun Dolphin Dr.
Muskegon, MI 49444
Phone 231-733-2725
Fax 231-739-4502
Email klsales@klindustries.com
Website www.klindustries.com
Bass Hound™
10.2
March 2007
THANK YOU
Thank you for purchasing this fishing boat from
KL Industries, Inc.
Congratulations on the recent purchase of your new fishing
boat. You have purchased a boat from one of the nations
leading manufacturers of small boats. Your boat represents
years of commitment to product design, excellence in
engineering and quality in manufacturing. With proper care
and maintenance your pedal boat should last for many
years to come. Please call our helpful and knowledgeable
Customer Support Department if you have any questions.
KL Industries, Inc.
1790 Sun Dolphin Dr.
Muskegon, MI 49444
Phone 231-733-2725
Fax 231-739-4502
Email klsales@klindustries.com
Website www.klindustries.com
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Bass Hound 10.2 and is the answer not in the manual?

Questions and answers

Related Manuals for KL Industries Bass Hound 10.2

Summary of Contents for KL Industries Bass Hound 10.2

  • Page 1 THANK YOU Thank you for purchasing this fishing boat from KL Industries, Inc. FISHING BOAT Congratulations on the recent purchase of your new fishing OWNER’S MANUAL boat. You have purchased a boat from one of the nations Bass Hound™ 9.4 leading manufacturers of small boats.

  • Page 2: Table Of Contents

    Page 3 Paperwork Illustrations of Models Pages 4-5 1. Warranty Registration Card. To properly register your boat with KL Industries for warranty About Your Fishing Boat Page 6 validation please fill out the warranty registration • Hull Material form online at www.klindustries.com. Please review •...

  • Page 3: Product View & Specifications

    MODEL MODEL Bass Hound™ 9.4 Bass Hound™ 10.2 Twin swivel Twin padded swivel Trolling motor Livewell fishing chairs fishing chairs plug-in socket with drain Livewell with drain Bow navigation light Thru-transom drain Battery box (battery not included) Battery compartment Built-in trolling (battery not included) motor mount Trolling motor...

  • Page 4: About Your Fishing Boat

    ABOUT YOUR FISHING BOAT Installing the Seats You should have the following components: - 2 seats Hull and Deck - 2 swivel mounting bases with pedestals The hull and deck are thermoformed from sheets of High - 8 fasteners (4 for each seat mounting base) Density Polyethylene plastic.

  • Page 5: Installing A Trolling Motor Pages

    Installing Oar Locks (if desired) 1. Cut the trolling motor power wires just behind the Note that not all models include an Oar Locking Horn Kit. alligator clips or ring connectors and strip about ½” If you would like an Oar Lock Kit, it is available for of the insulation from the end of these wires.

  • Page 6: Installing Accessories

    INSTALLING ACCESSORIES PRE-LAUNCH CHECK Fish Finders/Depth Finders Bass Hound™ & 9.4 & 10.2 1. Drain Plug Models Make sure that the transom drain plug, livewell drain plug and bow drain plug are all installed. 1. Hook up power for the fish finder or other accessories for the Bass Hound™...

  • Page 7: Operating The Boat Pages

    when loading the boat and planning how far from reasonably level fore to aft and side to side. If not, shore you intend to go. redistribute the items you have on board. 6. Personal Flotation Gear 7. Be especially conscious of the shore condition. Always make sure that everyone in the boat is Sharp rocks, sharp edges on break walls, concrete wearing the proper Personal Flotation Device (life...

  • Page 8: Transporting

    1. Install the stern light pole in the socket, making If the bow tends to plow down in the water, shift sure the tab on the pole lines up with the groove on weight toward the stern. the socket 2. The 10.2 navigation lights are operated by TRANSPORTING installing the lights into the sockets.

  • Page 9: Maintenance

    MAINTENANCE STORAGE General Cleaning Remove the boat from the water. Leaving the boat in the Wash with a mild detergent and water. If necessary, use a water for any longer than a few days will promote algae growth on the hull. very soft bristle brush.

  • Page 10: Optional Accessories

    KL Industries, Inc. warrants to the original owner of any Trailers designed for use with the KL Industries fishing KL Industries boat. Any part of the boat that is defective in boats can be purchased at a local trailer dealer.

Table of Contents

Save PDF