Table of Contents
Advertisement
This manual is based on firmware version 9.41-
1710. If you have an older or newer firmware ver-
sion some of the functions mentioned in this manu-
al may not be present or may operate differently.
We are committed to your satisfaction with this product. If you have any ques-
tions or require technical assistance please contact us at any of the coordinates
below:
Flanders Scientific, Inc.
470 Satellite Blvd. NE
Suite P
Suwanee, GA 30024
Phone: 678.835.4934
Fax: 678.804.1882
E-Mail:
Support@FlandersScientific.com
www.FlandersScientific.com
Click Here to Open Print Friendly
Version of this Document
Many of the topics covered in this
manual are also covered by our
Video Manual available at:
www.FlandersScientific.com
LCD Monitor User Manual
LM-1760W & LM-1760WF
Version 2.7 (Updated 5.23.2011)
LM-0750W
LM-1770W
LM-2450W
LM-2460W
LM-2461W
LM-2470W
Advertisement
Table of Contents
Related Manuals for Flanders Scientific LM-2450W
Summarization of Contents
Safety Precautions: General Operating and Screen Care
General Operating Safety
Covers operating instructions, warnings, attachments, power cord safety, voltage, overloading, insertion of objects, water exposure, and self-servicing.
Screen Maintenance Guidelines
Provides advice on avoiding screen damage, proper cleaning methods, and recommended materials like lint-free cloths.
Safety Precautions: Chassis and Compliance
Chassis Maintenance and Handling
Details chassis cleaning, avoiding volatile substances, contact with rubber/plastic, moving precautions, vent obstruction, heat sources, and sunlight.
FCC Compliance and Warnings
Outlines FCC testing, limits for digital devices, and warnings against unauthorized modifications to the equipment.
Front Panel Overview and Controls
Front Panel Input Connectors
Describes the front panel input connectors including SDI, YPbPr, Video, and DVI interfaces.
Front Panel Buttons and Knobs
Details the F1-F5 function keys, navigation buttons, Power, Volume, and Contrast controls.
Rear Panel Connectors and Additional Controls
Rear Panel Connectivity Ports
Details rear panel ports such as LAN, GPI, RS-485, DVI-I, RS-232, Video, Component, SDI, and Audio.
Front Panel Function Knobs Explained
Describes the Bright/F.D./Ref Pos, Chroma/V Pos, Phase/H Pos, and Tally controls on the front panel.
Menu Navigation and System Status
Main Menu Structure Overview
Describes the structure and categories within the monitor's main menu system.
System Status Information
Explains the System Status category providing information like serial number and firmware version.
Function Menu: Key Assignments
Function Key Assignment Overview
Explains how to assign user-selectable functions to the F1-F5 buttons for quick access.
Assignable Functions (Part 1)
Details initial assignable functions like Scopes & VU Meters, Cross Hatch, Blue Only, Marker, and Overscan.
Function Menu: Picture-in-Picture and Scaling
Sub Window and Pixel Mapping
Covers Sub Window (PiP), Pixel Mapping options, Pixel Position, and Zoom functions.
Signal Processing Functions
Details H/V Delay Mode for signal analysis and Mono Mode for monochrome display.
Function Menu: Image Manipulation
Aspect Ratio and Screen Fill
Covers SD Aspect Ratio toggling and Full Screen mode for image scaling.
Pixel Zoom and Luminance Coloring
Details the Pixel Zoom feature for detailed area analysis and LUM Coloring for luminance mapping.
Function Menu: Measurement Tools
Measurement Function Details
Explains the measurement feature, crosshair positioning, and real-time data display for signal analysis.
Reference and F-Stop Settings
Details setting reference positions and F-Stop references for comparative measurements.
Function Menu: Advanced Features
Focus Assist and Wipes
Covers the Focus Assist feature for critical focus checks and Level B Variable Wipe for split screen monitoring.
Video Freezing and DSLR Integration
Details Still Frame functionality and DSLR Zoom for camera monitoring during recording.
Function Menu: Broadcast Monitoring
DSLR Zoom Operation Examples
Provides examples illustrating the DSLR Zoom feature in different recording modes.
Safety Broadcast Mode
Describes the Safety Broadcast monitoring mode for control rooms and QC stations.
Marker Menu: Configuration and Display
Marker Profile Setup
Explains setting up marker profiles and selecting marker types like Area, Safety, and Background.
Marker Display Options
Details Center Marker, Marker Color, Active Boundary, and Graticules settings for onscreen markers.
Video Menu: Picture and Signal Settings
Picture Settings
Covers Gamma Select, Film Gamma, Color Temperature, and Sharpness Level adjustments.
Signal and Aspect Ratio
Details Mono Mode, SD Aspect Ratio, and Signal Mode for incoming video signals.
Video Menu: Processing and Overscan
Video Processing Options
Explains Normal, Fast, and Noise Reduction processing modes and their latency impact.
Overscan Functionality
Describes how Overscan interacts with Pixel to Pixel mapping for display scaling.
Video Menu: Input Setup
Composite and Component Setup
Covers Composite and Component signal setup options for accurate color and setup.
SDI Format Configuration
Details SDI format auto-detection and manual selection for various SDI inputs.
Scopes & VU Meters Menu: Display Options
Scope Profile Configuration
Explains setting up three profiles for Waveform, Vector, and Audio Level Meter displays.
Scope Display Settings
Covers Window 1 & 2, Waveform Position, Scopes Stack, Waveform Scale, and Alignment Level.
Scopes & VU Meters Menu: Audio Metering
Audio Display Configuration
Details Audio Display Mode, Audio Display Channels, and Permitted Max Level for audio meters.
System Menu: Input and Signal Settings
DVI and Component Input Configuration
Covers DVI Selection, DVI Pixel Format, Component Input, and Component Pixel Format.
3G Level B SDI Monitoring
Explains the 3G Level B feature and its various monitoring options for SDI signals.
System Menu: Display and Profile Management
Display Brightness and LED Control
Covers Back Light, Back Light Interval, and LED Light settings for display management.
Zoom, Part Display, and Profiles
Details Zoom, Part Display, Load Profile, and Save Profile functions for system configuration.
Alarm Menu: Event Monitoring
Alarm Event Types and Visual Indicators
Explains different alarm types (Safety, IRE, RGB) and how visual alarms are displayed.
Alarm Menu: Remote and Area Settings
Remote Monitoring and Trigger Thresholds
Covers remote monitoring, IRE/Audio trigger levels, and audio mute settings.
Alarm Area and UMD Settings
Details Select Alarm Area, UMD Display/Color/Position, and Audio Meter settings.
Alarm Menu: Communication Settings
RS422 and Baud Rate Configuration
Covers RS422 Address, Baud Rate, and Parity settings for communication.
OSD Menu: Display Configuration
On-Screen Display Layout
Covers Status Display, Menu Position, Status Position, and Rotary Position settings.
Source ID and Time Code Settings
Details Source ID and Time Code display options and their positions.
GPI Menu: Remote Control Interface
Assignable GPI Functions
Explains how to assign functions to GPI slots for remote control operations.
GPI Connector and Wiring
Describes the RJ-45 GPI connector and pin assignments for system integration.
Audio Menu: Source and Synchronization
Audio Source Selection
Details selecting audio sources for SDI, Component, CVBS, DVI-D, and DVI-A inputs.
Audio Synchronization Settings
Explains the Audio Sync settings for matching audio and video signals.
Display Alignment Menu: Calibration
Color Calibration and Alignment
Covers automatic alignment, factory reset, and manual RGB Gain/Bias adjustments.
Display Settings and Firmware Update
Details Color Space, Video Clipping, and firmware update procedures.
Need help?
Do you have a question about the LM-2450W and is the answer not in the manual?
Questions and answers