Table of Contents
Related Manuals for Patterson CS
Summarization of Contents
Safety Precautions
General Operation Warnings
Advises against exceeding rated speed, operating outside manual instructions, and operating under conditions not designed for.
General Information
Pump Assemblies
Details the two main assemblies: Volute assembly and Rotating element.
Storage and Protection
Storage Precautions
Lists specific actions like coating unpainted surfaces, rotating shafts, and checking space heaters.
Installation
Location Considerations
Discusses factors for choosing a pump location, emphasizing accessibility and proximity to supply.
Mounting and Piping
Explains pipeline installation, supports, and piping alignment requirements.
Wiring and Controls
Outlines electrical connection requirements, emphasizing code conformity and matching motor data.
Operation
Pump Starting Procedure
Details steps for starting the pump, including priming methods and pre-start checks.
Pump Shutdown Procedure
Explains the recommended procedure for shutting down the pump, including valve operation and freezing precautions.
Maintenance
General Maintenance Tasks
Covers basic maintenance like checking seals, motors, electrical contacts, and lubrication.
Inspection and Maintenance Schedule
Presents a schedule for routine and periodic inspections and services for VIL pumps.
Repairs and Replacement
Impeller and Seal Removal
Provides step-by-step instructions for removing the impeller and mechanical seal for various pump types.
Cleaning Procedures
Outlines safe and effective cleaning methods for pump parts, with specific cautions for seals.
Inspection and Assembly
Describes part inspection and reassembly guidance, focusing on cleanliness and proper fitting.
Locating Operating Difficulties
No Water Delivered
Lists potential causes for the pump not delivering any water, such as priming issues or low speed.
Abnormal Output or Pressure
Identifies reasons for reduced output or low discharge pressure, including air leaks, clogs, or mechanical defects.
Intermittent Operation
Lists common causes for the pump operating intermittently, such as suction line leaks or air in the liquid.
Pump Overloads or Vibrates
Details conditions causing driver overload or pump vibration, like high head, binding, or misalignment.
Recommended Spare Parts
Spare Parts for Intermittent Duty
Specifies spare parts recommended for pumps used in intermittent service.
Spare Parts for Continuous Duty
Specifies spare parts recommended for pumps used in continuous service.
Typical Assembly Sections
Type RC Assembly Diagram and Parts
Illustrates components and lists parts/materials for the Type RC pump.
Type CC Assembly Diagram and Parts
Illustrates components and lists parts/materials for the Type CC pump.
Type CS Assembly Diagram and Parts
Illustrates components and lists parts/materials for the Type CS pump.
Need help?
Do you have a question about the CS and is the answer not in the manual?
Questions and answers