Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Airmar 100WX
Summarization of Contents
Introduction to WeatherStation Instrument
Key Features
Summarizes the main capabilities and advantages of the WeatherStation Instrument.
Safety Precautions
Installation and Electrical Safety
Covers safe practices for installing and powering the instrument.
Compass and Magnetic Field Safety
Addresses safe distances and calibration for compass accuracy.
Understanding Wind Data
Adding External Sensors
Details how to connect and integrate external sensors.
Cables and Connecting Hardware
WeatherStation Cables
Lists available cables for connecting the instrument.
Connecting/Converting Hardware
Describes necessary hardware for network integration.
Mounts
Illustrates different mounting options for the instrument.
Installation Tools and Parts
Tools & Materials
Lists required tools and materials for installation.
Where to Purchase Parts
Provides contact information for obtaining parts.
Choosing the Mounting Location
Antenna Placement Guidelines
Illustrates recommended separation distances from other antennas.
Installing the WeatherStation Instrument
Instrument Orientation and Alignment
Guides on correct positioning for accurate readings.
Mounting Tightening and Thread Lock
Advises on secure fastening and thread lock usage.
Permanent Mounting Procedures
Mounting Hardware Installation
Steps for securely fixing the mounting hardware.
Securing the Mount and Extension Tube
Instructions for attaching the mount and optional extension.
Attaching the Instrument Cable
Cable Routing and Nut Assembly
Guides on threading the cable and assembling the nut.
Final Instrument Alignment and Securing
Steps for final alignment and fastening.
Cable Routing and Connections
Connection and Power Warnings
Emphasizes power off and correct voltage/fuse.
Routing and Interference Cautions
Advises on cable routing to prevent damage and interference.
Cable Management and Protection
Covers securing excess cable and protection.
Connecting to NMEA 0183 Devices
Connecting to NMEA 0183 Display
Steps for connecting to a display via NMEA 0183.
Wiring without a Connector
Instructions for hardwiring the cable.
Connecting to NMEA 2000 Network
NMEA 2000 Network Setup
Details connecting to an NMEA 2000 network.
Calibrating the Compass
Compass Calibration Pretest
Procedure to check if compass calibration is needed.
AutoCalibration Procedure
Step-by-step guide for calibrating the compass.
Maintenance and Cleaning
Instrument Care and Cautions
Important warnings regarding disassembly and water exposure.
Cleaning Procedures
Instructions for cleaning the instrument.
Humidity Sensor and Software
Replacing the Humidity Sensor
Steps for replacing the humidity sensor.
Software Updates and Installation
Information on obtaining and installing software.
Troubleshooting Guide
Addressing Reading Issues
Troubleshooting steps for inaccurate or missing data.
GPS Fix Troubleshooting
Steps to resolve issues with GPS signal acquisition.
Technical Information
NMEA 2000 LEN Specification
Details the Load Equivalency Number for NMEA 2000 devices.
Document Information
Acronyms and Glossary
Definitions of terms and abbreviations used in the manual.
Trademarks
Lists registered trademarks associated with the product.
Need help?
Do you have a question about the 100WX and is the answer not in the manual?
Questions and answers