Seagate STAM1000100 User Manual page 13

2. Setting Up GoFlex Home – Windows
3. Connect the drive to the dock, then press the Power button to the On position.
a. Align the connector on the bottom of the drive with the connector in the base.
b. Gently press down on the drive until it clicks into place.
c. Press the Power button.
Figure 5: Docking the GoFlex Drive
4. Wait for the lights on the front of GoFlex Home to stop blinking. This may take a couple of
minutes.
Solid white when ready
Figure 6: GoFlex Home Lights
If the GoFlex Home light is not solid green, wait about two minutes to make sure that GoFlex
Home has had a chance to fully start up; if it's blinking amber, GoFlex Home either can't
connect to the network or can't communicate with the drive. See "Solving Problems" on
page 75 for more help.
FreeAgent® GoFlex™ Home User Guide (Version 2)
Drive Light:
Step 2: Connecting GoFlex Home
GoFlex Home Light:
Solid green when ready
13