NETGEAR RND2110 - ReadyNAS Duo NAS Server Setup Manual page 19

Figure 19
Click Send Test Message to verify that alert messaging is working. If you do not receive the
2.
test message, check the network gateway and DNS settings.
Some network firewalls prevent unknown message transfer agents (MTAs) (such as those used
by the ReadyNAS Duo) from working. If this is the case, you will need to specify a remote
SMTP server in Advanced Control mode when you are done with the Setup Wizard. This
method is covered in the ReadyNAS Duo User Guide.
Various email services may filter out the test message and actual email alerts sent
by the ReadyNAS Duo. Verify that the test message arrives at the email
destination before continuing.
Click Next to access the Ethernet Network screen.
3.
Using the Setup Wizard 15