Table of Contents
Advertisement
MAXTOR FUSION USER'S GUIDE
APPENDICES
Appendix I – Setup Wizard
You may not have finished the second part of the Maxtor
Fusion installation – the Setup Wizard can be restarted at
any time. Use the information here to help you complete
Maxtor Fusion installation, or to assist you when making
system-level changes (applying a new DNS Hostname,
for example). Much of the information contained here is
available in the Setup Wizard online help.
Part II of the installation helps you set up your Maxtor
Fusion, guiding you through the process of adding sub-user
(non-administrator) accounts, activating the email engine,
and configuring the system for Internet access.
As in the previous section, do not use the forward and back
buttons on your browser. Instead, use the Next and Back
icons located in the bottom right corner of the screen.
Back Next
Using the browser buttons for navigation may require you to
rerun the Setup Wizard process.
To run the Setup Wizard you must log in as the administrator.
Log in using the admin username and password at the main
login screen.
If you've forgotten the admin password, it should be
recorded in the printed checklist that was filled out at
installation time. If you don't have the checklist or didn't
record the password, you can enter the username admin and
then click the link at the bottom that says Forgot Password?.
The login screen will display a hint (also set up at installation
time) to help you remember the password.
After logging in, click on SET PREFERENCES (looks like the
outline of a person) located under the MAKE PUBLIC button,
then on the SETUP WIZARD tab.
The Setup Wizard enables the admin user to add and
manage user accounts, and configure network and system
settings.
PAGE 21
Adding Additional User Accounts
You can add up to 14 user accounts for yourself, family,
friends, or co-workers. Each user will have their own
storage space with their own login and password – every
sub-user account is private from all others.
A user account is not required to view files loaded onto your
Maxtor Fusion; however, only registered users can access
the system and use the features of the system, including
adding and deleting files.
If you don't want to add anyone at this time, simply click on
the SKIP button. You can always add users later.
If you'd like to add users:
1.
Enter a User Name, Password, Password Hint, and Email
Address in the proper fields.
2.
After entering the information for each user, click the
Create New Account button in the lower left.
3.
Once you have finished adding user names, click on the
Next Page button.
Note: All user information except the User Name can
be changed later. The user name cannot be changed.
Users can change their Display Name for their Public
Share page, but they cannot change their User Name,
which is used for login purposes.
Advertisement
Table of Contents
