NETGEAR SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall Configuration Manual page 3

Creation of the VPN Policy on the ProSafe Router:
The following fields will now be available:
Connection Name: The name can
be any alphanumeric string. The
name identifies your tunnel, but it
bears no relevance to the
connection.
➊ ➊ ➊ ➊
Pre-Shared Key: The pre-shared
key can be any alphanumeric string
from 8 to 49 characters long.
➋ ➋ ➋ ➋
Remote Identifier Information:
The Remote Identifier can be any
alphanumeric string. It is a name
that identifies the remote peer
➊ ➊ ➊ ➊
(Client) in the VPN Connection. You
can leave the default or create your
➋ ➋ ➋ ➋
own identifier.
➌ ➌ ➌ ➌
➌ ➌ ➌ ➌
Local Identifier Information: The
Local Identifier can be any
alphanumeric string. It is a name
that identifies the local peer (Router)
in the VPN Connection. You can
leave the default or create your own
identifier.
WAN Interface: If your router has
more than one WAN Interface, you'll
be prompted to select which interface
to use for the VPN Tunnel.
Page 3 of 8
From the Router's GUI, go to the
VPN section and then select the
VPN wizard.
Select the VPN Client option.
Version 1.2