Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Gamewell IF632
Summarization of Contents
IMPORTANT INFORMATION
ENVIRONMENTAL CONSIDERATIONS
Specifies operating temperature range and humidity requirements for the equipment.
INSTALLATION CONSIDERATIONS
Guidelines for clean environment, proper wiring, and component handling during installation.
WIRING CONSIDERATIONS
SURVIVABILITY
Requirements for circuit protection for notification appliances to ensure system survivability.
MAINTENANCE
Procedures for keeping the fire alarm system in excellent working order.
SYSTEM RE-ACCEPTANCE TEST
Procedure for testing the system after any modification, repair, or adjustment.
OTHER CONSIDERATIONS
Covers FCC warning, Canadian requirements, and general manual disclaimers.
Section 1 FPT Gateway Overview
1.1 Product Description
Details the functions and capabilities of the FocalPoint Gateway.
1.1.1 About Workstation Ethernet Network Installations
Explains the Workstation's client-server architecture and network usage.
1.2 Agency Listings
1.2.1 Compliance
Specifies the standards the product complies with.
1.2.2 Installation
Details regulatory agencies and standards for installation.
1.2.3 Retrofit Applications
1.2.4 Environmental Requirements
Specifies the required environmental conditions for gateway installation.
Section 2 FPT Gateway Installation
2.1 Required Equipment
Lists all necessary equipment for FPT Gateway installation.
2.2 Installation Overview
Provides an overview of the installation steps.
2.2.1 Gateway Board Layout
Diagram and description of the FPT Gateway PC board components.
2.3 Cabinet Installation
Step-by-step instructions for mounting the gateway cabinet.
2.4 Hardware Installation
Instructions for mounting the PNET-1 and PC board in the cabinet.
2.5 Cable Connections
Detailed instructions for connecting various cables to the gateway.
2.6 Power Connection
Details on connecting the gateway to a power supply.
Section 3 FPT Gateway Configuration
3.1 Default FPT Gateway Selection Procedure
Steps to select the default FPT Gateway using the config tool.
3.2 FPT Gateway Configuration Procedure
Step-by-step guide for configuring the FPT Gateway settings.
3.2.2 Panel Configuration Settings
Configuring panel settings, including network type and node mapping.
3.2.3 Time Settings
Procedure for setting SNTP server and time zone for the gateway.
3.2.4 Login Password Settings
Procedure to change the gateway's login password.
3.2.5 IP Address Change Using an Alternate Method
Alternative method for changing the gateway's IP address.
3.3 Gateway and System Communication Configuration
Establishes communication between the gateway and the Workstation.
3.3.1 Add a Network Connection to the Workstation
Steps to add a network connection for the gateway to the Workstation.
Section 4 FPT Gateway Operation
4.1 Gamewell Panel Groups
Setting up points into groups on Gamewell panels.
4.1.1 Procedure
Steps to configure panel group icons on the Workstation.
4.2 Event Handling
How the Workstation handles events received through the gateway.
4.2.1 Handling Special Circumstance Events
Describes responses to network interrupts and gateway power-ups.
4.2.2 Node Mapping
Explains the consequences of mapping or not mapping nodes on the network.
4.3 Device Commands
Lists commands that can be sent to Gamewell/FCI devices via the Workstation.
4.4 About FCI Point ID Formats for Off Normal Events
Explains codes appended to point IDs for off-normal events.
4.5 About Auto-created Points
How points are auto-created in the Workstation and requirements for icons.
4.5.1 SmartProgram II Application
Details the SmartProgram II application for panel programming.
Section 5 FocalPoint Gateway Config Tool Reference Information
5.1 About the FocalPoint Gateway Config Tool
Overview of the FocalPoint Gateway Config Tool interface.
5.2 Field Descriptions
Explanation of fields within the Config Tool.
5.2.1 Gateway Field Description
Description of the Gateway field in the Config Tool.
5.2.2 IP Configuration Fields
Description of IP Configuration fields in the Config Tool.
5.2.3 SNTP Configuration Fields
Description of SNTP Configuration fields in the Config Tool.
5.2.4 Time Zone Configuration Fields
Details on configuring time zone and DST settings.
5.2.5 Panel Properties Fields
Description of panel property fields in the config tool.
5.3 Menu Descriptions
Reference to menu options within the Config Tool.
5.3.1 File
File menu options including Login and Exit.
5.3.2 View
View menu options like Refresh Gateway List.
5.3.3 Configure
Configure menu option for setting gateway password.
5.3.4 Help
Help menu option for displaying version information.
Manufacturer Warranties and Limitation of Liability
Manufacturer Warranties
Details the warranty period and conditions for products.
Warranty Claims
Procedure for submitting warranty claims for defective parts.
Need help?
Do you have a question about the IF632 and is the answer not in the manual?
Questions and answers