Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Dell UPS Site Preparation Guide, EMEA.
Applies Dell Rackmount UPS Models, 3750W, 4200W & 5600W
Note: This document is for guidance only. Actual installation instructions and safety cautions are included within the UPS User
Guide.
Site Preparation Checklist
Installation site meets minimum environmental requirements.
Ensured all required accessories have been ordered with the UPS
Required electrical supply is available.
Scheduled an electrician to install the Dell UPS.
Provided a copy of this preparation guide to the electrician.
Made electrician aware of the electrician's checklist in the User Manual.
Dell UPS Site Preparation Guide, EMEA (230V)
Revision 1, February 2012
Advertisement
Table of Contents
Related Manuals for Dell 4200W
Summarization of Contents
Site Preparation
Physical Requirements for the Dell UPS
Details physical dimensions, weight, and technology for different UPS models.
Environmental Requirements for the Dell UPS
Specifies suitable operating and storage temperature, humidity, and elevation ranges.
Heat Output for the Dell UPS
Lists heat loss in Watts/BTU for various UPS models in normal and battery modes.
Optional accessories for Dell UPS
Describes optional accessories like battery modules, network cards, and probes with their purpose.
Electrical Preparation
Electrical Requirements for the Dell UPS
Outlines input voltage, power draw, overcurrent protection, and wire size for UPS models.
Electrical Requirements for the REPO Switch
Details wiring, terminal size, and suggested wire size for the REPO switch function.
Electrical Wiring and Schematics
Basic Installation Schematic with Optional Power Cord
Provides a diagram for connecting the UPS using an optional 32A 1-phase input cord.
Basic Installation Schematic Hardwired to Protection Device
Illustrates the wiring diagram for hardwiring the UPS to an overcurrent protection device.
Overcurrent Protection Devices
Protection for All Models (Except 5600W Online)
Explains the need for a dedicated 2-pole overcurrent protection device for most UPS models.
Protection for 5600W Online UPS
Details the requirement for an external isolating device for the 5600W Online UPS to prevent backfeed.
Receiving and Installing the Dell UPS
Inspecting the Equipment
Guides on checking for shipping damage and filing claims if necessary.
Unpacking the Dell UPS
Provides instructions for removing UPS parts and checking box contents.
Installing the Dell UPS into the Rack
Offers key points for safely installing the UPS chassis, battery modules, and accessories into a rack.
Need help?
Do you have a question about the 4200W and is the answer not in the manual?
Questions and answers