Advertisement
Quick Links
4/05/10
This procedure is used to update Main CPU Ver.
programming for FT
PEP9000.
IMPORTANT:
This procedure is only needed under the below conditions:
•
Must have the PEP9000 logo sticker on the radio below the serial number label.
•
Must have MAIN CUP Version 0505 or higher or EDSP Version 11.24. While holding the three
buttons [GEN]＋[50]＋[ENT] turn the radio on and read the 7 digits on the top line of the LED
display. See page (6) for more detail instructions. If the software version is not immediately
displayed, your radio has not been updated to PEP9000; you must have the radio updated. Please
contact Vertex Standard, Amateur Tech Support.
If your radio meets the above conditions you may proceed to update the Main CPU to V0518
programming and EDSP to V11.54.
We recommend installing the Flash Programming Software on a PC computer with Windows 2000,
XP or Vista Operating System; and use the CT-119 programming cable or 8-pin mini-DIN PGM-SW
(P0091526) and serial cable RS-232C, DB9F to DB9F straight cable.
NOTE: There are many USB adapters available; however some may not function with this software.
We recommend using the latest USB adapter driver software when available.
.
The update software is available from our website at http://www.yaesu.com. The CT-119
programming cable is available from your authorized Vertex Standard dealer. You may also order
by email to Vertex Standard parts department,
.
The software updates will work with PEP9000 all versions (AF, AS, EU, NA, OC, SA or all Countries) of the
PEP9000
9000 Transceivers that have already been updated to
DX
PEP9000 Logo Sticker
FT
9000Contest, FT
DX
DX
0518
and EDSP Ver.
9000D and FT
9000MP
DX
11.54
flash
Advertisement
Related Manuals for Yaesu FTDX9000 - UPDATE V0518 AND V11.54
Summary of Contents for Yaesu FTDX9000 - UPDATE V0518 AND V11.54
- Page 1 NOTE: There are many USB adapters available; however some may not function with this software. We recommend using the latest USB adapter driver software when available. The update software is available from our website at http://www.yaesu.com. The CT-119 programming cable is available from your authorized Vertex Standard dealer. You may also order...
- Page 2 Do not keep any of the old files or folders on your computer. (The old files are not compatible with the PEP9000 updated radio). 1. Down load the FT 9000 data file [FTdx9000_PEP9000_4-05-10.zip] from the following website: http://www.yaesu.com/indexVS.cfm?cmd=DisplayProducts&ProdCatID=102&encProdID=34B0B268 F77981D7E72CF66FC1930880&DivisionID=65&isArchived=0 2. Save the FT 9000 data file [FTdx9000_PEP9000_4-05-10.zip] to the desktop on your computer.
- Page 3 3. Unzip and Extract the contents of [FTdx9000_PEP9000_4-05-10.zip] to the desktop of your computer. 4. You will find the PEP9000_EDSP and PEP9000_MAIN folders on your desktop. The programmer and software are now stored on your computer on the desktop. The files designated in the last step above are ready to update your FT 9000 Transceiver.
- Page 4 (6) When the program opens, confirm that the file AH010N_V0518.SFL is highlighted; if not, click on it to highlight it. (7) Click on [WRITE] in the program window. A green status bar should appear below the [WRITE] button to show the progress of the download. Do not interrupt the process until it completes. (8) When the loading process is complete, an [OK?] box will appear.
- Page 5 EDSP Software Update This procedure is used for uploading new EDSP Software into the FT 9000 Amateur Transceivers, from your personal computer, using the RS-232C, DB9F to DB9F straight cable. 1. Turn off the main power switch located on the back of the FT 9000 (or turn off the power supply for FT 9000MP and wait a minute, until the capacitors discharge) and remove the AC...
- Page 6 EDSP and the Main CPU, you may wish to make new settings. We hope this new software will increase your enjoyment of your FT 9000. Thank you for choosing Yaesu radios. If you have any problems or questions please contact Vertex Standard, Amateur Tech Support. amateurtech@vxstdusa.com...