Related Manuals for Panasonic UJ35 Series
Summarization of Contents
LED Product Safety Precautions
LED Product Classification
Describes the classification of the LED head according to safety standards.
Safety Precautions for Users
Details user safety guidelines and standards for product operation.
Preventive Safety Measures Summary
Summarizes preventive safety measures based on laser product standards.
Key Safety Features
Details safety features like remote interlock, key switch, and emission warnings.
Warning Labels and Standards
Explains product labels conforming to JIS, GB, and IEC/EN standards.
General Safety Precautions
Understanding Hazard Symbols
Explains caution indication levels and symbols for hazard identification.
Mandatory and Prohibited Actions
Lists specific actions to avoid or perform for safe operation.
Precautions for Use
General Usage Guidelines
Covers general precautions, warranty, and product modification guidelines.
Installation Environment Requirements
Specifies ambient temperature, humidity, and location conditions for setup.
Power Supply Specifications
Details electrical power requirements and necessary precautions.
Setup and Power-On Procedures
Covers physical setup, ventilation, and pre-power-on checks.
Warranty Terms and Exclusions
Details the warranty period and extent of coverage for the product.
Warranty Disclaimers and EOL Policy
Covers implied warranties and product end-of-life policy.
Product Features
High-Power Irradiation and Extended LED Life
Details high-power capabilities and extended LED lifespan.
Temperature Stability and Ease of Installation
Describes UV curing without heat, intensity stabilization, and easy installation.
Programmable UV Irradiation Control
Explains the control of multiple heads and programmable operations.
User-Friendly Design and Safety Features
Covers universal design, intuitive operation, and multiple safety features.
Connectivity and Power Supply Details
Details detachable terminals and universal power supply.
Part Names and Functions
Controller Components Overview
Shows the controller unit, AC adapter, and manual.
Optional LED Heads and Accessories
Displays LED head, standard lens, and connection cable.
Controller Front and Rear Panel Views
Illustrates the front and rear panels of the controller with labels.
Detailed Component Descriptions
Provides detailed descriptions for controller front and rear components.
Installation
Installation Environment Requirements
Specifies ambient temperature, humidity, and leveling requirements.
Irradiation Distance and Intensity Guidelines
Provides charts for UV intensity distribution based on distance and area.
Lens Performance Data Charts
Presents typical UV intensity data for different lens types.
Getting Started
Connecting the Connection Cable
Instructions for plugging in the connection cable to the main unit.
Connecting the LED Head and Jig
Details how to connect the LED head and jig, with heat dissipation info.
Connecting External Control Signals
Explains how to connect external signals using removable connectors.
AC Adapter Connection and Power-On
Steps for connecting the power supply and initial startup.
Operation Modes
Default Operation Mode Overview
Explains status indicators and display meanings in the default mode.
Setting Irradiation and Timer Modes
Details how to set intensity, time, and use timer irradiation.
Continuous Irradiation and External Start Signals
Describes continuous irradiation and using external start signals.
Head Management and Panel Locking
Covers displaying head info and locking panel settings.
UV Intensity Measurement Procedure
Step-by-step guide for measuring UV intensity with a sensor.
Auto Tuning Calibration Process
Explains how to perform auto tuning for calibration.
Default Settings Mode Configuration
How to configure units, signals, and buzzer settings.
Batch Irradiation Timing Charts
Illustrates timing for batch irradiation operations.
Continuous Batch Irradiation Timing
Timing chart for continuous batch irradiation.
Individual Irradiation Timing Charts
Timing charts for individual timer and continuous irradiation.
External Control
External Input/Output Control Details
Explains I/O connectors, pin assignments, and wiring.
External Signal Operation and Specifications
Details product type switching and signal operation.
RS-232C Communication Specifications
Covers RS-232C connector pinouts and communication parameters.
Command and Response Protocols
Explains command formats, responses, and error codes.
Supported Commands and Error Codes
Lists control and support commands, and detailed error codes.
Data Area Read and Write Procedures
Describes how to write and read data areas using commands.
Communications Address Map for Reading
Table listing addresses for reading various parameters.
Communications Address Map (Continued)
Continues the table of addresses for reading parameters.
Communications Address Map (Continued)
Continues the table of addresses for reading parameters.
Communications Address Map (Continued)
Continues the table of addresses for reading parameters.
Addresses for Data Writing and Operation Timing
Lists addresses for writing data and their effect on operation.
Writing Data and Settings via Addresses
Details writing data and settings via specific addresses.
Writing Data and Settings via Addresses (Continued)
Continues writing data and settings.
Writing Data and Settings via Addresses (Continued)
Continues writing data and settings.
WRITE Procedure for Data and Settings
Explains the procedure for writing data and settings to memory.
Setup Tool Application Overview
Introduces the PC application for UJ35 setup.
Using the Setup Tool Menu Bar
Details functions of File, Communication, and Help menus.
Configuring Type and Display Settings
Explains setting Type and display modes via the PC application.
Setting Cumulative Irradiation Time and Controller Mode
Covers setting cumulative time and switching controller modes.
Setting Replacement Time and Program Steps
Details setting LED replacement time and program steps.
Real-time Monitoring with AUTO Screen
Describes the AUTO screen for real-time monitoring and control.
UV Measurement and Calibration with UV.CHK
Explains measuring UV strength and performing calibration.
Warning Indications
Temperature Warning Indicators
Describes what happens when LED head temperature reaches warning level.
Time Warning Indicators
Explains indicators when LED replacement time is approached or reached.
Understanding Error Codes
Lists error codes and their descriptions.
Safety Measures
Safety Circuit Functions
Details the safety circuit's behavior during malfunctions and accidents.
Specifications
Controller Specification Overview
Lists general specifications for the ANUJ3000/3500 controller.
LED Head Specifications
Details specifications for different types of LED heads.
UV Sensor Specifications
Lists specifications for the ANUJ3800 UV sensor.
Dimensions
LED Head Dimensions
Provides dimensional data for various LED heads.
Controller and Accessory Dimensions
Shows physical dimensions of the controller, heads, and accessories.
Options and Spare Parts
Controller, Head, and Lens Options
Lists available controllers, LED heads, and lenses with product numbers.
Connection Cable Options
Details available connection cables and their product numbers.
Sensor, Adapter, and Goggle Options
Lists UV sensor, AC adapter, and protective goggles.
Replacing the Lens Unit
Instructions on how to replace the LED head lens unit.
Installing the Mounting Bracket
Guide on how to fit the mounting bracket for the LED head.
Troubleshooting
Troubleshooting Common Issues
Provides solutions for common symptoms like no irradiation, warnings, and errors.
Need help?
Do you have a question about the UJ35 Series and is the answer not in the manual?
Questions and answers