Table of Contents
Advertisement
Grass Trimmer/Brush Cutter
Operator's Manual
MODELS,
Read rules for safe operation and instructions carefully. ECHO provides an Operator's Manual and a
Safety Manual. Both must be read and understood for proper and safe operation.
X7532279701
Type 1E
SRM-2400
Serial Number 562682 & Up
SRM-2410
Serial Number 503485 & Up
WARNING
The engine exhaust from this
product contains chemicals known
to the State of California to cause
cancer, birth defects or other
reproductive harm.
WARNING
DANGER
89861154131
09/99
Advertisement
Table of Contents
Related Manuals for Echo SRM-2410 TYPE 1E - 09-99
Summarization of Contents
Introduction
The Operator's Manual
Explains specifications and information for operation, starting, stopping, maintenance, storage, and assembly.
The Safety Manual
Explains potential hazards and safety measures for using grass trimmers and brush cutters.
Manual Safety Symbols & Important Information
Important Safety Symbols
Explains the meaning of symbols like WARNING, DANGER, and prohibition signs used in the manual.
Note for Symbols
Clarifies the meaning of the "NOTE" symbol, providing tips for unit use, care, and maintenance.
Safety
General Description
Provides a general overview and illustration of the product's main components and variations.
Decals
Safety Decal Locations
Locates safety decals on the unit and emphasizes understanding and following their instructions.
Decal Information
Details specific safety decals found on the unit, including warning and danger symbols.
International Symbols
Symbol Explanations
Explains various international symbols used on the equipment for operation and safety.
Equipment Checks
Pre-Operation Equipment Inspection
Outlines essential checks for the unit before operation, including loose parts, fuel leaks, and cutting attachments.
Fuel Handling and Safety
Fuel Requirements and Safe Handling
Details safe practices for mixing, storing, and handling fuel, emphasizing flammability and proper containers.
Personal Condition and Safety Equipment
Stresses the importance of physical condition and wearing proper safety gear for safe operation.
Safe Operation Practices
Personal Protective Equipment
Specifies required eye, hand, and hearing protection, as well as appropriate clothing and footwear.
Determine Operation Area
Guides on assessing the work area for hazards and maintaining a safe zone for bystanders and animals.
Operation Procedures
Proper Clothing and Equipment
Reinforces equipping oneself and any other person within the safety zone with required protective gear.
Handling Hot Surfaces
Warns about hot components during and immediately after operation, advising against contact.
Grip and Stance
Instructs on maintaining a firm grip on handles and a solid stance for stable and safe operation.
Extended Operation and Extreme Conditions
Vibration and Cold Effects
Discusses potential health issues like Raynaud's Phenomenon from vibration and cold exposure and preventative measures.
Repetitive Stress Injuries (RSI)
Explains risks of RSI and Carpal Tunnel Syndrome (CTS) and preventative measures to reduce strain.
Description and Contents
Product Description
Provides information on factory pre-assembly and necessary post-unboxing checks for parts.
Contents List
Lists all included items with model-specific availability for checking missing parts.
Blade Terms and Definitions
Blade Convertible Models
Details blade conversion capabilities for SRM-2400 models, including required kits.
Dedicated Blade Capable Models
Explains blade capabilities for SRM-2410 models, including required kits.
Emission Control
Emission Control Label
Shows the location and details of the emission control label on the engine, referencing EPA and California regulations.
Specifications
Model Specifications Comparison
Compares key technical specifications for SRM-2400 1E and SRM-2410 1E models.
Assembly
ECHO Approved Optional Attachments
Advises using only ECHO approved attachments for safety and product integrity.
Plastic Shield Installation
Provides step-by-step instructions for installing the plastic debris shield for nylon line operation.
Nylon Line Head Installation
Details the process for installing the nylon trimmer head onto the unit's PTO shaft.
Blade Installation
Metal Shield Installation
Outlines the steps for installing the metal shield required for blade use.
Blade Attachment
Describes the procedure for attaching metal blades, including specific plates, nuts, and securing pins.
Harness Clamp Installation
Clamp Mounting and Balancing
Guides on installing the harness clamp and adjusting it for proper unit balance.
Front Handle Installation
Handle Positioning
Instructions for positioning and securing the front handle for comfortable operation.
U-Handle Installation
U-Handle Kit Installation Steps
Details the process of removing existing parts and installing the U-Handle Kit components.
Pre-Operation Setup
Preparing for Blade Use
Details specific configurations and kits required for safe operation with blades.
Choosing the Correct Blade
Guides on selecting appropriate blades and maintaining sharpness for safe cutting.
Blade Types and Harness Recommendations
8 Tooth Weed/Grass Blade
Describes the intended use of the 8-tooth blade for grass and weeds, not brush or thick growth.
Brush/Clearing Blade
Details the use of the brush/clearing blade for cutting brush and woody growth up to 3 inches.
Shoulder/Waist Harness Use
Recommends the harness for all operations to reduce fatigue and enhance safety during use.
Fuel System
Fuel Requirements
Specifies the type of gasoline (89 Octane unleaded) and two-stroke oil (ISO-L-EGD) required for engine operation.
Fuel Handling Precautions
Provides detailed safety guidelines for handling flammable fuel, including mixing, storage, and refueling.
Equipment and Operation Area Checks
Equipment Check
Lists essential checks for the unit's components and attachments before starting operation.
Determine Operation Area
Advises on reviewing the work area for hazards and maintaining a safe zone for bystanders and animals.
Operation
Starting a Cold Engine
Step-by-step guide for starting the engine when it is cold, including choke, primer, and pull rope usage.
Starting a Warm Engine
Procedure for Warm Start
Explains how to start the engine when it is already warm, noting differences from cold start procedures.
Stopping the Engine
Engine Shutdown Procedure
Details the steps for safely stopping the engine using the stop switch and throttle.
Maintenance Overview
Skill Levels for Maintenance
Defines three skill levels for performing maintenance tasks, indicating complexity and tool requirements.
Maintenance Intervals
Dealer Recommended Maintenance
Lists maintenance procedures recommended for authorized ECHO dealers.
DIY Maintenance Schedule
Provides a schedule for do-it-yourself maintenance tasks with frequency and skill level.
Air Filter Maintenance
Cleaning and Replacing the Air Filter
Instructions for cleaning or replacing the air filter element for optimal engine performance.
Fuel Filter Maintenance
Replacing the Fuel Filter
Details the process of removing and replacing the fuel filter using specific tools and precautions.
Spark Plug Maintenance
Checking and Adjusting Spark Plug
Guides on inspecting, cleaning, replacing, and gapping the spark plug for proper ignition.
Cooling System Cleaning
Cleaning Engine Cooling Fins
Explains how to clean the engine's cooling system to prevent overheating and seizure.
Exhaust System Maintenance
Spark Arrestor Screen Cleaning
Provides steps to remove, clean, and inspect the spark arrestor screen in the muffler.
Carburetor Adjustment
Type 1E Emission Models Adjustment
Details how to check and adjust the idle speed for Type 1E emission models.
Lubrication
Gear Housing Lubrication
Instructions for cleaning and checking grease levels in the gear housing.
Drive Shaft Lubrication
Guides on lubricating the flexible cable within the drive shaft housing.
Nylon Line Replacement
Replacing Trimmer Line
Step-by-step instructions for rewinding or replacing the nylon trimmer line in the head.
Sharpening Metal Blades
8-tooth Blade Sharpening
Details the procedure for sharpening the 8-tooth metal blade, including angle and technique.
Troubleshooting Guide
Engine Starting Issues
Lists common problems when the engine starts hard or doesn't start, with causes and remedies.
Engine Running Issues
Addresses issues like stalling or poor acceleration, with causes and remedies.
Storage Procedures
Long Term Storage (over 30 days)
Provides instructions for preparing the unit for storage exceeding 30 days, including draining fuel and oiling.
Servicing Information
Parts and Service
Information on obtaining genuine ECHO parts and locating authorized service dealers.
Consumer Product Support
Contact details for ECHO's consumer product support department for assistance.
Manuals and Ordering
Guidance on acquiring additional or replacement manuals and parts catalogs.
Need help?
Do you have a question about the SRM-2410 TYPE 1E - 09-99 and is the answer not in the manual?
Questions and answers