Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Viper 200.4
Summarization of Contents
Front Panel Connections and Status LED
RCA Input and Output Jacks
Details on line level RCA inputs and summed stereo RCA outputs for connecting audio sources and amplifiers.
Status LED Indicator
Explanation of the GREEN LED indicating normal operation or no activity during protection mode.
Rear Panel Connections
Speaker Output Terminals
Instructions for connecting speakers to the amplifier's output terminals for audio playback.
Remote Turn On Terminal
Guidance on connecting the remote turn-on lead to activate the amplifier with the head unit.
Power Fuses
Information about the purpose of power fuses for protecting the amplifier from internal damage.
+12 Volt Power and Ground Connections
Battery and Chassis Grounding Procedures
Detailed steps for connecting the positive 12V power and ground wires, emphasizing correct gauge and connection points.
Top Panel Controls
Input Gain Adjustment
Control amplifier sensitivity to match input signal level for clean output.
Crossover Settings
Instructions for setting crossover types (FLAT, HPF, LPF) and frequencies for different speaker configurations.
Bass EQ Function
Engage the Bass EQ switch to apply an 8 dB boost to the speaker output.
Top Panel Features and Mounting
Control Panel Cover Access
Guide to installing and removing the magnetic cover protecting the amplifier's controls.
Illuminated Window Alignment
Steps for attaching and aligning the illuminated window to the control panel cover.
Viper Badge Mounting
Instructions for positioning and attaching the rotatable Viper badge to the amplifier.
Speaker Wiring Diagrams
Stereo Operation Wiring
Visual guide for connecting speakers in stereo mode for 4-channel configurations.
Bridged Operation Wiring
Visual guide for connecting speakers in bridged mode for 2-channel configurations.
Simultaneous Stereo/Mono Operation
Stereo/Mono Wiring Diagram
Diagram showing speaker connections for simultaneous stereo and mono audio output configurations.
Crossover Settings and Gain Adjustment
Crossover Tuning
Instructions for setting crossover types (FLAT, HPF, LPF) and frequencies for different speaker configurations.
Gain Adjustment
Procedure for setting amplifier gain to achieve optimal signal match and avoid distortion.
Need help?
Do you have a question about the 200.4 and is the answer not in the manual?
Questions and answers