Table of Contents
Advertisement
Safety • Assembly • Operation • Tips & Techniques • Maintenance • Troubleshooting • Parts Lists • Warranty
OPERATOR'S MANUAL
Model 24A-424G766 Shown
Chipper Shredder — Models 414 & 424
IMPORTANT
READ SAFETY RULES AND INSTRUCTIONS CAREFULLY BEFORE OPERATION
Warning: This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest-covered, brush-
covered or grass-covered land unless the engine's exhaust system is equipped with a spark arrester meeting applicable local or state laws (if any).
If a spark arrester is used, it should be maintained in effective working order by the operator. In the State of California the above is required by law
(Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. A spark arrester
for the muffler is available through your nearest engine authorized service dealer or contact the service department, P.O. Box 361131 Cleveland,
Ohio 44136-0019.
FORM NO. 769-00830B
PRINTED IN U.S.A.
TROY BILT LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019
6/01/2005
Advertisement
Table of Contents
Related Manuals for Troy-Bilt 24A-424G766
Summarization of Contents
Important Safety Introduction
Pre-Operation Safety Review
Emphasizes reading all safety rules and instructions before operating the chipper shredder.
Spark Arrester Warning
Advises on the use and necessity of a spark arrester for engine exhaust systems.
Customer Support
Model and Serial Number Identification
Guides users to locate and record equipment model and serial numbers for support.
Safety Labels
Safety Symbol Interpretation
Explains the meaning of the "WARNING" symbol and operator's responsibility.
Hazard Warning Decals
Details specific DANGER and WARNING labels found on the machine.
Safe Operation Practices
General Operational Safety Rules
Covers essential safety rules, including keeping clear of moving parts and ensuring bystander safety.
Pre-Operation Training and Preparation
Outlines training requirements, personal protective equipment, and fueling procedures.
Engine and Maintenance Safety Guidelines
Provides warnings regarding engine exhaust, modifications, and general maintenance precautions.
Setting Up Your Chipper Shredder
Unpacking and Initial Component Check
Lists loose parts and instructs on checking them upon unpacking.
Chipper Chute Lowering Procedure
Step-by-step guide to lowering the chipper chute from its shipping position.
Attaching Collection Bag and Tow Bar
Instructions for connecting the debris bag and tow bar to the unit.
Chipper Shredder Component Identification
Details and illustrates key parts such as the hopper, chutes, and controls.
Operating Your Chipper Shredder
Fueling and Oil Level Check
Safe procedures for filling the fuel tank and verifying engine oil levels.
Engine Starting Sequence
A detailed guide for starting the chipper shredder's engine.
Engine Shutdown Procedure
Correct steps to safely stop the chipper shredder engine.
Shredding and Chipping Material Guidelines
Best practices for feeding various types of yard waste into the machine.
Clearing Hopper Clogs and Emptying Bag
Procedures for safely resolving hopper blockages and emptying the debris bag.
Maintaining Your Chipper Shredder
Routine Lubrication and Engine Care
Instructions for lubricating moving parts and performing basic engine maintenance.
Machine Inspection and Cleaning
Guidance on checking hardware and cleaning the reduction chamber.
Chipper Blade Sharpening and Replacement
Steps for maintaining the sharpness and condition of chipper blades.
Shredder Blade Sharpening and Replacement
Detailed instructions for sharpening or replacing the main shredder blade.
Proper Equipment Storage
Steps for cleaning and storing the unit to prevent damage during non-use periods.
Troubleshooting
Problem Diagnosis and Resolution
A comprehensive table listing common issues, their causes, and suggested remedies.
Parts List
Main Assembly and Hitch Components
Identifies parts for the primary machine structure and towing hitch.
Detailed Component Breakdown Diagram
A visual illustration of machine parts with numerical references.
Comprehensive Parts Inventory and Numbers
A complete list of all parts with their associated part numbers for ordering.
Manufacturer's Limited Warranty
Warranty Terms and Conditions
Details the warranty period, coverage, exclusions, and user responsibilities.
Service and Support Information
Provides guidance on how to obtain warranty service and contact Troy-Bilt.
Need help?
Do you have a question about the 24A-424G766 and is the answer not in the manual?
Questions and answers