Table of Contents
Advertisement
Quick Links
Owner's Manual
Intelligent, Line-Interactive UPS System
• 220/230/240V Pure Sine Wave Input/Output
Important Safety Instructions
Quick Installation
Optional Installation
Basic Operation
Battery Replacement
Storage and Service
Español
Français
Deutsch
PyccŞèé
SmartPro
Not suitable for mobile applications.
1111 W. 35th Street Chicago, IL 60609 USA
Customer Support: (773) 869-1234 • www.tripplite.com
Copyright © 2006 Tripp Lite. All rights reserved. SmartPro
SLT
®
®
is a trademark of Tripp Lite
2
3
4
5
8
8
9
17
25
33
Advertisement
Table of Contents
Related Manuals for Tripp Lite SmartPro SLT SMX1500SLT
Summarization of Contents
Important Safety Instructions
UPS Location Warnings
Guidelines for safely installing the UPS indoors, considering temperature, moisture, heat, and ventilation.
UPS Connection Warnings
Precautions for connecting the UPS to AC power, emphasizing proper grounding and avoiding modifications.
Equipment Connection Warnings
Advice against using the UPS for life support and warnings about connecting surge suppressors to UPS output.
Battery Warnings
Safety information regarding electrical shock, battery handling, disposal, and authorized replacement.
Quick Installation Guide
Set Voltage Dip Switches
Use a tool to set voltage dip switches to match your input voltage before connecting.
Connect Power Cord to UPS
Plug the user-supplied power cord into the UPS AC input and then into a wall outlet.
Connect Equipment to UPS
Connect computer's AC input to the UPS female output receptacle using provided cords.
Plug Equipment into UPS
Connect additional equipment using the provided power cords to the UPS output receptacles.
Turn UPS ON
Press and hold the ON/OFF/STANDBY button for one second to power on the UPS.
Optional Installation Procedures
USB and RS-232 Serial Communications
Connect UPS to computer via USB or DB9 serial cable for PowerAlert Software.
Telephone/Network Protection Jacks
Connect telephone/network cables to UPS jacks for surge protection on data lines.
Basic Operation and Indicators
Front Panel Buttons
Details on using the ON/OFF/STANDBY and MUTE/TEST buttons for UPS control.
Self-Test Results Interpretation
Guidance on understanding UPS status based on LED indicators and alarm sounds after a self-test.
Front Panel Indicator Lights
Explanation of the POWER, VOLTAGE CORRECTION, OUTPUT LOAD LEVEL, BATTERY CHARGE, and BATTERY WARNING LEDs.
UPS Features and Rear Panel
AC Receptacles and Communications Ports
Description of IEC-320-C13 outlets and USB/RS-232 ports for equipment and computer connection.
Telephone/Network Protection Jacks
Details on surge protection jacks for telephone and network data lines.
Voltage DIP Switches
Explanation of how to set voltage DIP switches to match input voltage for proper UPS operation.
Accessory Slot and Input Breaker
Information on the accessory slot for optional modules and the input breaker for overload protection.
Battery Replacement and Service
Battery Replacement Procedure
Step-by-step guide for safely replacing UPS batteries, including preparation and reassembly.
UPS Storage Guidelines
Instructions for storing the UPS, including powering off, unplugging, and periodic battery charging.
Service and Return Procedures
Steps to follow before returning the UPS for service, including troubleshooting and obtaining an RMA number.
Need help?
Do you have a question about the SmartPro SLT SMX1500SLT and is the answer not in the manual?
Questions and answers