Table of Contents
Advertisement
Please do not return product to retailer.
Por favor, no devuelva el producto al lugar de compra.
Veuillez ne pas retourner le produit au détaillant.
1- -800- -554- -6723
Register your product online at:
Registre su producto en línea en:
Enregistrez votre produit en ligne à l'adresse :
www.poulan.com
Manual de Instrucciones
For Occasional Use Only
WARNING:
Read and follow all Safety Rules and Operating Instructions before
using this product. Failure to do so can result in serious injury.
ADVERTENCIA:
Lea el manual de instrucciones y siga todas las advertencias e en-
strucciones de seguridad. El no hacerlo puede resultar en lesiones
graves.
AVERTISSEMENT:
Lire le manuel d'instructions et bien respecter tous les avertisse-
ments et toutes les instructions de sécurité. Tout défaut de le faire
pourrait entraîner des blessures graves.
Poulan
7349 Statesville Road
Charlotte, NC 28269
Instruction Manual
Manuel d'Instructions
850 Matheson Blvd. West
Mississauga, Ontario L5V 0B4
115327926 Rev. 1
R
P3816
Poulan
3/15/10 BRW
Advertisement
Table of Contents
Related Manuals for Poulan Pro P3816
Summarization of Contents
IDENTIFICATION OF SYMBOLS
Safety Symbols and Warnings
Explains safety symbols, warnings, and essential operating precautions like using two hands.
Starting Reminder Steps
Outlines the steps for priming, choke, and pulling the starter rope to begin engine operation.
SAFETY RULES AND GUIDELINES
Planning and Protective Gear
Emphasizes planning, understanding the manual, and wearing appropriate protective gear for safe operation.
Safe Operating Procedures
Details rules for operating the saw safely, including body positioning and work area preparation.
OPERATING AND MAINTAINING YOUR SAW
Safe Saw Handling and Grip
Provides guidance on operating the saw with two hands, proper grip, and avoiding hazardous situations.
Maintaining Saw Performance
Details the importance of proper maintenance and using recommended parts for optimal performance.
Fuel Safety and Kickback Prevention
Covers safe fuel handling practices and strategies to reduce the risk of dangerous kickback.
KICKBACK SAFETY FEATURES
Kickback Reduction Mechanisms
Explains features like reduced-kickback bars and low-kickback chains designed to mitigate kickback hazards.
Chain Brake and Kickback Angle
Describes the function of the chain brake and the significance of computed kickback angles (CKA) for user safety.
ASSEMBLY AND SPECIFICATIONS
Attaching the Guide Bar and Chain
Step-by-step instructions for correctly attaching the guide bar and saw chain to the unit.
Kickback Angle Data Table
Presents a table detailing computed kickback angles for various chain and bar combinations.
CHAIN TENSION MANAGEMENT
Adjusting Chain Tension Correctly
Provides detailed instructions on how to properly check and adjust the chain tension for safe and effective operation.
CHAIN SAW COMPONENTS AND OPERATION
Identifying Saw Parts and Controls
Identifies and describes the main parts and controls of the chain saw for user familiarity.
Engine Starting System Overview
Explains the functions of the ON/STOP switch, throttle, choke, and primer bulb for starting the engine.
PRE-OPERATION CHECKS AND FUELING
Engine Start Preparations
Lists essential checks and safety precautions to perform before starting the engine.
Fueling, Lubrication, and Warnings
Details proper fuel mixture ratios, alternative fuel warnings, and bar and chain lubrication requirements.
ENGINE STARTING AND CHAIN BRAKE
Cold and Warm Engine Start Guide
Provides step-by-step guides for starting a cold engine and a warm engine, including choke usage.
Flooded Engine and Chain Brake
Addresses challenges with starting a flooded engine and explains the function and operation of the chain brake.
OPERATING TIPS AND TREE FELLING
Braking System Functionality Check
Describes how to check the chain brake's functionality while the engine is running.
Basic Saw Usage and Felling Intro
Offers practical tips for using the saw and introduces techniques for felling trees safely.
CUTTING TECHNIQUES FOR TREES
Tree Felling: Notch and Felling Cuts
Details the process of making notch cuts and felling cuts to safely bring down a tree.
Bucking Fallen Trees
Explains the process of bucking (cutting a fallen tree into logs) and types of cuts used.
BUCKING AND LIMBING METHODS
Bucking Without Support Techniques
Covers techniques for bucking logs that are not supported, focusing on cutting direction and avoiding pinching.
Limbing and Pruning Procedures
Provides instructions for safely removing branches from a felled tree and pruning smaller limbs.
ROUTINE SERVICE AND MAINTENANCE
Maintenance Schedule Overview
Outlines a schedule for checking various parts and provides general recommendations for unit upkeep.
Inspecting Parts and Chain Condition
Details inspections for loose parts, fasteners, and indicators for chain sharpening.
Guide Bar Maintenance and Cleaning
Explains how to maintain the guide bar and identifies conditions requiring its maintenance or cleaning.
CLEANING AND INSPECTION PROCEDURES
Air Filter Maintenance
Provides instructions for cleaning the air filter to maintain engine performance and longevity.
Muffler and Spark Arrestor Cleaning
Covers inspection and cleaning of the muffler and spark arresting screen for safety and performance.
REPLACEMENT AND CHAIN SHARPENING
Spark Plug and Fuel Filter Replacement
Instructions for replacing the spark plug and fuel filter to ensure reliable engine starting and operation.
Chain Sharpening Guide
Details the process and tools required for sharpening the saw chain, including cutter and depth gauge adjustments.
ENGINE ADJUSTMENTS AND STORAGE
Carburetor Tuning and Cooling System
Explains how to adjust the carburetor for idle speed and describes the saw's cooling system and its maintenance.
Proper Storage Instructions
Provides guidance on proper storage of the chain saw after use and for seasonal periods.
TROUBLESHOOTING AND ENGINE ISSUES
Engine Troubleshooting Guide
A table listing common engine problems, their causes, and recommended remedies for diagnosis and repair.
WARRANTY AND COMPLIANCE INFORMATION
Limited Warranty Terms
Outlines the terms and conditions of the limited warranty for parts and labor based on usage type.
Emissions Control Warranty Details
Explains the warranty coverage for emission control systems and owner responsibilities for maintenance.
Need help?
Do you have a question about the P3816 and is the answer not in the manual?
Questions and answers