Table of Contents
Advertisement
Advertisement
Table of Contents
Troubleshooting
Related Manuals for Orion XTREME 300
Summarization of Contents
About This Manual and Safety
Practice Safe Sound
Warning about hearing damage from high sound pressure levels and recommended precautions.
Record Your Serial Number and Date
Section for users to record product identification and purchase details.
Technical Design Features Overview
Amplifier Component Call Outs
Identifies and describes the function of each connector and control on the amplifier.
System Planning and Configurations
System 1 Configuration
Describes a basic two-channel amplifier setup driving a pair of satellites.
System 2 Configuration
Outlines a system using two amplifiers for satellites and subwoofers, with remote gain control.
System 3 Configuration
Details a three-amplifier system for front/rear fade, including subwoofer integration.
System 4 Configuration
Describes a four-amplifier system for enhanced front satellite power and control.
System 5 Configuration
Explains a complex five-amplifier system with master/slave configurations for crossovers and levels.
Power Connections Guide
Power Connections for XTREME 1200
Specific power connection details and warnings for the XTREME 1200 model.
Input Section Controls
Phase Switches Explained
Details the function and combinations of the left and right phase control switches.
Internal Crossover Section
Low-Pass Crossover
Configuration details for the low-pass filter, including bypass and frequency range.
Fine Tuning the Low-Pass Crossover
Specific frequency points and tuning advice for the low-pass crossover.
High-Pass Crossover
Configuration details for the high-pass filter, including frequency ranges and INTELLI Q.
High-Pass Crossover Applications
Guidance on using the high-pass crossover for mid/tweeters and woofers in different system setups.
Fine Tuning High-Pass Crossover
Specific frequency points and tuning advice for the high-pass crossover in its "HIGH" range.
Adjusting INTELLI Q
INTELLI Q Boost Response
Describes the "Q" boost filter response and its effect on bass output.
INTELLI Q Usage Examples
Demonstrates INTELLI Q adjustments for different enclosure types and their impact.
Installation Tips
Tools for the Trade
Lists the essential tools required for a successful amplifier installation.
Choosing Mounting Locations
Passenger Compartment Mounting
Specific advice for mounting the amplifier within the vehicle's passenger compartment.
Trunk Compartment Mounting
Specific advice for mounting the amplifier in the vehicle's trunk.
Engine Compartment Mounting
Warning against mounting the amplifier in the engine compartment due to harsh conditions.
Testing the System
Adjusting the Sound of the System
Steps for tuning and optimizing the audio system's sound output.
Autosound 2000 Troubleshooting
Quick Check for Car Audio Troubleshooting
An introductory overview of the troubleshooting process for car audio systems.
Noise Overview in Car Audio Systems
Identifies common sources of electrical noise in car audio systems and their causes.
Autosound 2000: 1-2-3 Logical Troubleshooting Method
A systematic, step-by-step approach to diagnosing audio system problems.
Need help?
Do you have a question about the XTREME 300 and is the answer not in the manual?
Questions and answers