Table of Contents
Advertisement
Operator's Manual
Rear Tine Tiller
Model Series 410
IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY
Warning:
This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest-
covered, brush-covered or grass-covered land unless the engine's exhaust system is equipped with a spark arrester meeting
applicable local or state laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator.
In the State of California the above is required by law (Section 4442 of the California Public Resources Code). Other states may have
similar laws. Federal laws apply on federal lands. A spark arrester for the muffler is available through your nearest engine authorized
service dealer or contact the service department, P.O. Box 361131 Cleveland, Ohio 44136-0019.
MTD LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019
PRINTED IN U.S.A.
770-10136E.fm
FORM NO.
(10/05)
Advertisement
Table of Contents
Related Manuals for MTD 21AA414A729
Summarization of Contents
Important Safe Operation Practices
Training
Instructions for understanding controls and safe operation.
Preparation
Steps to prepare the tiller before operation.
Operation
Guidelines for safe and effective tiller operation.
Maintenance & Storage
Guidelines for storing and maintaining the tiller.
Assembling Your Tiller
Attaching Depth Stake
Detailed steps for attaching the depth stake assembly to the tiller.
Attaching Handle Assembly
Instructions for connecting the handle assembly to the tiller frame.
Attaching Gear Shift Rod
Procedure for connecting the gear shift rod to the tiller.
Attaching Clutch Cable
Routing the clutch cable and securing it.
Final Clutch Adjustment
Steps for adjusting the clutch for proper operation.
Know Your Tiller
Gear Selection Handle
Explains the function and operation of the gear selection handle.
Clutch Handle
Describes the clutch handle and its engagement mechanism.
Throttle Control
Details the throttle control for engine speed and stopping.
Choke Lever and Primer Button
Operation of choke and primer for starting a cold engine.
Handle Adjustment Crank
How to adjust the handle height for user comfort.
Operating Your Tiller
Gas And Oil Fill-Up
Procedure for filling the engine with gasoline and oil.
Starting Engine
Step-by-step instructions for starting the tiller's engine.
To Stop Engine
Safe procedures for shutting down the tiller's engine.
Setting The Depth
How to adjust the depth stake for desired tilling depth.
Operating the Tiller
Instructions for engaging wheels and tines for operation.
Making Adjustments
Handle Adjustment
Instructions for adjusting the tiller's handle position.
Belt Tension Adjustment
Procedure for adjusting belt tension for optimal performance.
Maintaining Your Tiller
Engine Maintenance
Guidance on engine care, air cleaner, and spark plug.
Lubrication
Lubrication points for transmission, clutch, and shafts.
Cleaning Tine Area
How to clean the tiller's tines and underside.
Tire Pressure and Care
Recommended tire pressure and general tire maintenance.
Belt Replacement
Instructions for replacing the tiller's drive belt.
Need help?
Do you have a question about the 21AA414A729 and is the answer not in the manual?
Questions and answers