Panasonic Panafax DX-800 Specifications page 2

On Your Mark. Get Connected. Go!
DHCP Server
Directory
service Server
Automatic Network Setup with DHCP
The DX-800 can easily be configured as a DHCP* (Dynamic Host Configuration Protocol) client
within your local area network (LAN). Just plug the LAN cable into the DX-800's Fast Ethernet port.
Network information – IP Address, Subnet Mask, Default Gateway, Primary & Secondary DNS
Address – is automatically acquired from the DHCP server. No complicated setup or network
expertise is required.
*Requires a DHCP server on the network.
1000's of E-mail Addresses at Your Fingertips with LDAP
In addition to e-mail addresses registered in the DX-800, you can also access e-mail addresses
stored in the mail server thanks to LDAP** (Lightweight Directory Access Protocol). When used with
a mail server that supports LDAP directory service, the DX-800 can function as an LDAP client. You
can quickly search for a destinations e-mail address by entering the first few letters on the DX-800's
QWERTY keyboard. The total result is a "Scan to E-mail" feature that's even more powerful. It also
allows you to easily program your own autodial list using the LDAP directory.
**Requires a LDAP server on the network.