Advertisement
Quick Links
Advertisement
Related Manuals for Anker A1695
Summary of Contents for Anker A1695
- Page 1 At a Glance ① Retractable Built-In USB-C Cable (USB-C1) ② Non-Retractable Built-in USB-C Cable (USB-C2) ③ USB-C Port (USB-C3) ④ USB-A Port ⑤ Power Button ⑥ Main Screen How to Use the Built-In USB-C Cables Retractable Built-In USB-C Cable (USB-C1) Pull the cable to the desired length.
- Page 2 To adjust the cable, pull again, adjust to the desired length, then pull slightly (about 1cm) and stop to set it in place. Pull slightly (about 1cm) to retract the cable. Non-Retractable Built-In USB-C Cable (USB-C2) Push upward to extend the cable. Pull downward to secure the cable in place.
- Page 3 Screen Display Guide 1. Press the power button or pull the retractable built-in USB-C cable (USB-C1) to turn on the screen and check the battery status. 2. The screen stays on during charging / recharging. To manually turnoff the screen, press and hold the power button for 2 seconds.
- Page 4 Main Screen Features ① Charging / Output ② Trickle Charging Mode ③ Recharging / Input ④ Simultaneous Charging and Recharging / Pass-Through Charging ⑤ Remaining Battery Percentage ⑥ Full Recharge Time Battery Status Under Normal Conditions Active Cooling Mode: Displayed when the battery temperature is slightly high, reducing the power of charging or recharging to cool the power bank.
-
Page 5: Charging Your Devices
Charging Your Devices Charge your phones, tablets or laptops via the built-in USB-C cables (USB-C1 and USB-C2), the USB-C port (USB-C3), and the USB-A port. - Page 6 Recharging the Power Bank Recharge the power bank via one of the built-in USB-C cables (USB-C1 or USB-C2) or the USB-C port (USB-C3). *Note: The power bank cannot be recharged via USB-C1, USB-C2, and USB-C3 simultaneously. When connected to multiple power sources, the power bank will automatically select the one with the highest power for recharging.
- Page 7 Trickle Charging Mode Press the power button twice to activate trickle charging mode. Charge your earbuds or other low-power devices via the USB-A port. Press the power button twice to exit trickle charging mode.
-
Page 8: Other Screen Displays
Other Screen Displays Low Battery Alert: Displayed when the screen is manually turned off during charging / recharging, and the power level is lower than 10%. Circuit Protection: Displayed when current or voltage abnormality triggers circuit protection. - Page 9 Temperature Protection Mode: Activates when the battery temperature is too high or too low, stopping the power bank until the temperature returns to normal. Low Battery Health: Displayed when the battery life drops below 60%.
-
Page 10: Specifications
Specifications Total Capacity 25,000mAh Battery Capacity 5,000mAh, 18VDC / 90Wh (Five Cells in Series) 5-11V 3A / 5V 3A / 9V 3A / 10V 2.25A / 12V 3A / 15V 3A / 20V 5A (100W USB-C Cable / Port Input Max) 5-11V 3A / 5V...
Need help?
Do you have a question about the A1695 and is the answer not in the manual?
Questions and answers