Advertisement
Quick Links
Using Shelly Smart Control to change the Display Units
on a Shelly H&T Gen3 to Fahrenheit.
Introduc�on
By default, the Shelly H&T Gen 3 displays the temperature in Celsius. Use the following steps to
change the displayed temperature units from Celsius (°C) to Fahrenheit (°F).
Waking the Device
Before changing the temperature units displayed on the device, it is recommended to wake the
device. To wake the device,
1. Open the device.
Advertisement
Related Manuals for Shelly H&T Gen3
Summary of Contents for Shelly H&T Gen3
- Page 1 Using Shelly Smart Control to change the Display Units on a Shelly H&T Gen3 to Fahrenheit. Introduc�on By default, the Shelly H&T Gen 3 displays the temperature in Celsius. Use the following steps to change the displayed temperature units from Celsius (°C) to Fahrenheit (°F). Waking the Device Before changing the temperature units displayed on the device, it is recommended to wake the device.
-
Page 2: Changing The Temperature Units
2. Press the Reset buton. Changing the Temperature Units 1. Open the Shelly Smart Control app. 2. Tap the Room where the H&T Gen3 is located. 3. Tap the Shelly H&T Gen3. - Page 3 4. Tap the Sensor se�ngs buton represented by an icon displaying the device and a gear. 5. Tap Temperature units.
- Page 4 6. Tap the °F buton. A message is displayed: Setting saved successfully. The device is currently sleeping. It will update once it wakes up.
- Page 5 7. Wake the device as explained in the previous sec�on of this document. 8. Tap the back arrow in the Smart Control app. 9. The device displays the temperature in Fahrenheit.
Need help?
Do you have a question about the H&T Gen3 and is the answer not in the manual?
Questions and answers