Way Basics B09R1K9LWZ Manual

CAT LITTER
Included
18 Pins 1 Scratcher
2 Side 1 Middle 1 Back zBoard
zBoards zBoard
1 Top zBoard
2 Doors
1 Bottom zBoard
WARNING: CHOKING HAZARD
Small parts NOT for children under 3 years
Important
CAUTION placing unit on its side or back
will compromise structural integrity. Use
right side up.
Contact Us www.waybasics.com/contact
• Assemble your unit on a flat even surface
• Make sure zBoard surfaces are clean and dry
Back zBoard
1 Carefully remove the protective
layer leaving the 3M adhesive on
zBoard (adhesive shown in yellow).
Remove adhesive from side zBoards
4
and middle zBoard.
(Press)
Align horizontal zBoard to unit
7
as shown. Press down firmly.
2 Insert alignment pins to back zBoard.
Insert alignment pins to side zBoards
5
and middle zBoard.
(Press)
Orient door properly as shown
8
and align bottom pin. Press on
spring loaded top pin and insert.
• When moving your Way Basics unit, lift from the bottom
• Indoor use only. Not in bathroom.
3
Align back zBoard to horizontal
zBoard. Press down firmly.
Align vertical zBoards to horizontal
6
zBoard as shown. Press down firmly.
9 Place cat scratcher in unit. Optional
Put your cat litter box inside protector under your litter pan
doors. if needed to protect your litter
box enclosure.
Place a pee pad
version 0520