CAT SCRATCHER CUBE
Included
8 Pins
2 Side zBoards
adhesive on 2 sides
1 Top zBoard
1 Bottom zBoard
2 Entry zBoards
WARNING: CHOKING HAZARD
Small parts NOT for children under 3 years
Important
CAUTION placing unit on its side or back
will compromise structural integrity. Use
right side up.
Help and Comments www.waybasics.com/contact
• Assemble your unit on a flat even surface
• Make sure zBoard surfaces are clean and dry
1
Carefully remove the protective
layer leaving the 3M adhesive
on zBoard (adhesive shown
in yellow).
Align other Side zBoard to Bottom
4
zBoard and Entry zBoard as shown.
• When moving your Way Basics unit, lift from the bottom
• Indoor use only. Not in bathroom.
2
Place alignment pins
in vertical zBoards.
5
Align Top zBoard to unit and
press down firmly to secure.
3
Align a Side zBoard to Bottom zBoard
and Entry zBoard as shown.
6
Tap and pop open the circle
for entryway.
Enjoy building possibilities!
version 0418
Need help?
Do you have a question about the B08125K3H1 and is the answer not in the manual?
Questions and answers