Related Manuals for FoMaKo KC606
Summary of Contents for FoMaKo KC606
-
Page 2: Quick Start
You’ll need to change the IP address of either the camera or the controller to ensure the first three parts match. FoMaKo cameras and controller are optimized, normally, you don’t need change ip address for them. Add Cameras to the Controller ... - Page 3 Custom buttons to Enable/Disable FoMaKo PTZ camera AI tracking: This function is specific to FoMaKo AI tracking PTZ cameras and may not work with other brands' AI tracking cameras, as they use different command codes. Settings on the Controller’s Web Page: (1) Log into the controller’s IP address via a web browser on the same network.
- Page 4 Press “F3” to go back and “F4” to select. (2) Save more than 10 presets: Menu-> Knobs-> Keypad Numeric mode-> 255 If you need further support, please contact us at: ivan@fomako.net, normally, we can reply you within 12 hours.
- Page 15 Page 2...
Need help?
Do you have a question about the KC606 and is the answer not in the manual?
Questions and answers