FoMaKo KC-608 Quick Start

Dear Friend,
Thanks for ordering FoMaKo IP PTZ Controller. To setup your PTZ system easier, please read this quick start instruction first.
(1) Most cameras' connection information:
User Name: admin
(2) We recommend to use IP Visca or Sony Visca control protocol, the two protocols are more steady and work better.
(3) The Controller enabled DHCP, when you power on the controller, you can see controller's IP Address on the screen.
(4) Controller and Camera's IP must be in the same segment(the first three parts of IP address must be the same),
then you can use controller to visit camera.
For example: Controller's IP: 192.168.5.101
Camera's IP: 192.168.5.163 , they are in the same segment "192.168.5" , controller can visit camera.
Another example: Controller's IP: 192.168.5.101
Camera's IP: 10.12.11.122 , they are not in the same segment, controller can't visit camera.
You need change controller's IP to :10.12.11.X (X=2~255, and can't be taken by other devices)
or you can change camera's IP to: 192.168.5.X(X=2~255,and can't be taken by other devices)
(5) Method to change controller's IP: press "Setup" button -> IP:Stactic -> "Enter" button to input the IP address.
Please note that the IP address can't be used by other devices.
(6) Add camera to controller:
If your camera and controller's IP are not in the same segment, please check Step (4).
If your camera and controller's IP are in the same segment,please do the following steps:
"Setup" button - >Add: IP Visca (or Sony Visca) -> input your camera's IP ->input port:5678 (sony visca:52381) ->
input camera control ID(1-255 numbers)
(7)If you have second or more cameras need to add to the controller, please press "IP" button to add other cameras' IP address to controller one by one.
(8) If you use RS485/RS232/RS422 connection , and need help, please write to us.
Any more questions, please contact us at:
FoMaKo KC-608 IP PTZ Controller Quick Start
Password: admin IP Visca port: 5678 (or 1259)
ivan@fomako.net,
Sony Visca port: 52381
normally, we can reply you within 12hours.
Onvif Port: 2000
FoMaKo Supports Team