Download Print this page

TAC TB-C05 Manual

Arrowsidestep

Advertisement

Quick Links

60-120 min
Cutting Not
Required
Drilling Not
Required
Part List
www.tacautoparts.com
2019-Up Chevy Silverado 1500 Crew Cab
2020-Up Chevy Silverado 2500-3500 Crew Cab
FITS:
2019-Up GMC Sierra 1500 Crew Cab
2020-Up GMC Sierra 2500-3500 Crew Cab
Torque & Tools
Fastener
Tightening Torque
Size
(ft-lbs)
6mm
8mm
18-20
□ 10mm
□ 35-40
□ 12mm
□ 60-70
BEFORE INSTALLATION
REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ
INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION.
ASSISTANCE IS RECOMMENDED.
Sticker "D" for
Driver / Left Side
ARROW SIDE STEP
PART #: TB-C05
Wrench Required
7-8.5
Sticker "P" for
Front
Passenger / Right Side
Mounting
Bracket x 8
Customer Support: tac-office@tacautoparts.com
Allen Wrench
Required
10mm
13mm
□ 16mm
□ 18mm
□ 4mm
□ 5mm
□ 6mm
□ 8mm

Advertisement

loading
Need help?

Need help?

Do you have a question about the TB-C05 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for TAC TB-C05

  • Page 1 ARROW SIDE STEP PART #: TB-C05 2019-Up Chevy Silverado 1500 Crew Cab 2020-Up Chevy Silverado 2500-3500 Crew Cab FITS: 2019-Up GMC Sierra 1500 Crew Cab 2020-Up GMC Sierra 2500-3500 Crew Cab Torque & Tools Fastener Tightening Torque Allen Wrench Wrench Required...
  • Page 2 8mm Flat 8mm Lock 6mm x 22mm 6mm Flat 6mm Lock 6mm Hex 8mm x 30mm Washer Washer T-Bolt Washer Washer Hex Bolt FIG 2 PLEASE NOTE THAT THE FOLLOWING PICTURES ARE BASED ON THE PASSENGER SIDE INSTALLATION STEP 1 Remove plugs Start the installation under the Passenger/Right side of the vehicle.
  • Page 3 FIG 6 FIG 4 Front Front FIG 7 (Fig 6) Passenger/Right 3rd mounting location (Fig 4) Passenger/Right front mounting location STEP 4 Repeat Steps 1 - 3 to attach the (3) remaining Passenger/Right Mounting Brackets to the (3) remaining locations along the rocker panel, (Figs FIG 5 5—7).
  • Page 4 FIG 8 STEP 7 Repeat Steps 1—6 to attach the Driver/Left Side Step. STEP 8 Do periodic inspections to the installation to make sure that all hardware is secure and tight. (Fig 8) Insert (8) 6mm T-Bolts into the channels in FIG 9 the bottom of the Side Step, (4 T-Bolts per channel) Attention...