ITC Redwood TL5000 Installation Instructions

Redwood
Part#: TL5000, TS5020 & TS5003
PARTS/TOOLS NEEDED:
Table Base Floor Base
INSTALLATION CONSIDERATIONS
• To avoid a hazard to children, account for all parts and destroy all packing materials.
• Do not sit on or lean on table, intended for use as a table only.
1.
Mount the floor base into solid floor structure (wood,
fiberglass, etc.) using #10 phillips oval head screws.
2.
Mount the table base onto table top (customer
provided) using #10 phillips oval head screws. Make
sure the weight of the table top is evenly supported
over the table leg.
The top of the table leg has a positive lock so the table
will click in place.
3030 Corporate Grove Dr.
Hudsonville, MI 49426
Phone: 616.396.1355
itc-us.com
Table Leg
™
Table Leg
INSTALLATION INSTRUCTIONS
#10 Phillips Oval Head
Screws
3.
To secure, slot the T piece into the base and ro-
tate clockwise. Make sure the T-bolt is extended
all the way down. To loosen, turn the leg count-
er-clockwise.
For warranty information please visit www.itc-us.com/warranty-return-policy
Power Drill
(Not Provided)
(not provided)
Rev A • 01/10/23
Page 1 of 1