Related Manuals for cenmate 802RU
Summary of Contents for cenmate 802RU
- Page 4 When the protrusions of the tray conflict with the hard drive, cut off the protrusions or unplug the blue tabs and install the hard drive using the screws.
- Page 5 Note: Formatting is only required for new drives...
-
Page 10: How To Use
9.How to use 1.Pull out the tray 2.install the hard disk 3.connect esata or USB to the computer 4.plug in the power supply, turn on the power switch 5.the fan rotates and the hard disk light is on indicating that it is normal and you can start using it. Connection hard disk Steady blue Connection indicator Read/write Flashing red, ever steady on The connection light is always on blue (indicating a... - Page 14 A movement state of HDD Normal 2 Disk Volume 2 Disk Volume SATA 1 1000G SATA 2 750G SATA 1 1000G SATA 2 750G The operating system recognizes each as a single disk and uses the hard disks independently. A movement state of HDD JBOD 2 Disk Volume 1 Disk Volume...
- Page 15 RAID1 A movement state of HDD 2 Disk Volume 1 Disk Volume Mirror SATA 2 750G SATA 1 1000G 750G...
Need help?
Do you have a question about the 802RU and is the answer not in the manual?
Questions and answers