Related Manuals for cenmate 802RU
Summary of Contents for cenmate 802RU
- Page 1 2 Bay External Hard Drive RAID Enclosure for 2.5/3.5" SATA HDD/SSD PRODUCT INSTRUCTION Model: 802RU...
- Page 2 【Quality Assurance】Cenmate provides lifetime technical support.If you have any questions about the product, please don't hesitate to contact us, reply and solve your problem within 24 hours. Technical Support Contact: cenmate23@outlook.com Hard drives making noise during operation, it is not caused by fans.
- Page 3 Qusetion Q1： After connecting new hard drive to the computer, why can't I find the hard drive and display the disc letter? A1: After the new hard drive is connected to the computer, it must be formatted before the system can be recognised and used. Method of operation: First, right-click ‘Computer’, then click ‘Management’, open into the ‘Disk Management’, find the new hard drive, right-click ‘Initialisation ‘Select ‘MBR (hard drive capacity less than or equal to 2TB)’...
- Page 4 Linux 12V Power Supply CONNECTING HDD Pull out the hard drive Install the hard drives 802RU from the unit into the trays and put it back to the unit Pull up the blue clasp on both sides of the bracet, put hard...
- Page 5 For 2.5"SSD/HDD: Use screwdriver open the blue clasp on the side. Connect the USB cable to the computer Connect the USB 3.0 connector to the unit Connect the power connector from the power adapter, and plug the power adapter to the power source...
- Page 6 Please Note: For 2.5"SSD/HDD: Use a screwdriver to pry open the clip on the side and then secure them with screws. When installing the 2.5SSD, you need to push forward hard before installing the screws, and push in hard on the tray after installation is complete...
-
Page 7: Partition And Format
NOTE: Please follow below information on how to partition and format the drives before use NOTE: Data will be lost when you reset the unit Partition and Format Note: Formatting is only required for new drives 1. Right click on “My Computer” icon and select “Manage”. When this window appears, select “drive Management"... - Page 8 4. When new disk appears, right click on it and select “New Simple Volume” 5.When the wizard window appears, click on [Next]. 6.Select the partition size we reccomend to use as maximum and click on [Next]. 7.Select the drive letter to assign the hard disk and click on [Next].
-
Page 9: Product Specifications
5Gbps OS Support Windows 2000 or above, MAC OS 10.3 or above, and Linux Power Adapter 12V Power Adapter Enclosure Extruded Aluminum Case 802RU, USB 3.0 Cable, Screws and Screws-Driver, Package Contents Power Adapter and User Manual. Dimension 205x130x80mm Note HDD is not included USB 3.0 to SATA RAID Enclosure... - Page 10 Feature 2 Inch Cooling Fan Power Reset DC IN RAID USB 3.0 Interface 1. RAID Level : RAID 0, RAID 1, JBOD, NORMAL 2. USB 3.0 (MAX 5Gbps), USB 2.0 (MAX 480Mbps) 3. DC IN : 12V Power Supply 4. Cooling Fan : 2 Inch Fan (The fan requires a USB cable to be connected before it will wor) 5.
- Page 11 RAID Level Setting *Each works as a single hard disk, and the data is transferred individually to each hard drives. *Both Switch 1& 2 are off (Both Switch 1 & 2 are down) * JBOD mode (Spanning) join both hard drives capacity to provide a large volume.
-
Page 12: How To Use
How to use 1.Pull out the tray 2.Install the hard drive 3.Connect esata or USB to the computer 4.Plug in the power supply, turn on the power switch 5.The fan rotates and the hard drive light is on indicating that it is normal and you can start using it. Connection hard drive Steady blue Connection indicator (When incompatible with your hard drive, the blue light will show red) (When your hard drive is damaged, it will show a red light) - Page 13 Troubleshooting self-checking steps 1. Check if the device (hard drive) connected to the product is faulty. Connect to the SATA slot on the motherboard via a SATA hard drive to check the status. Verify that the hard drive is partitioned and formatted properly.
- Page 14 Caution Do not connect the 802RU and hard drive (HDD) to a computer when they are not fully assembled. There is arisk of damage and electric shock to the HDD. This device supports SATA(I/II/lII) HDDs! This device is also very teachable to small shocks, so be aware of shocks.
- Page 15 Power on/off: Power is supplied through the connected adapter, which can be turned on or off with the on/off switch. USB3.0 Port: Connects to a USB3.0 port to read and write data at speeds up to 5Gbps (same as USB2.0 when connected to a PC's USB2.0 port).
- Page 16 Normal A movement state of HDD 2 Disk Volume 2 Disk Volume SATA 1 1000G SATA 2 750G SATA 1 1000G SATA 2 750G The operating system recognizes each as a single disk and uses the hard disks independently. A movement state of HDD JBOD 2 Disk Volume 1 Disk Volume...
- Page 17 It consists of two or more hard disks that are striped and used as a single volume with a combined capacity. And when recording data continuously,each heart disk alternately records or reads different data at the same time, resulting in very fast transmission speeds. However, if even one hard disk fails, the rest of the data stored on the otherhard disks will also be lost, so data reliability is low.
- Page 18 RAlD Setup Software Please download 2 Bay RAlD Manager for WINDOWS OS Need more support, feel free to contact: cenmate23@outlook.com Only for Windows...
- Page 19 We are committed to providing consumers with superior products and services. Please contact us if you have any other questions. We really need your help if you are satisfied with our services!!! Could you share your feelings about this product with others on Amazon!? This will help them with their purchases.
Need help?
Do you have a question about the 802RU and is the answer not in the manual?
Questions and answers