Sequoia Professional Seneca CM-CLASSQ01-WAE Assembly Manual

Sequoia Professional
Seneca Adirondack Chair
Assembly Guide
IMPORTANT!
DO NOT fully tighten the bolts until all bolts are started.
Once all bolts are inserted, go back & tighten all the bolts.
HARDWARE INCLUDED
A
1/4"-20 x 1.75"
3) With the chair still on its side, attach the Back to the
Arm using one A bolt.
4) Attach the Seat to the Leg using two A bolts.
5) Flip chair onto its other side and repeat steps 3 & 4.
SEQUOIA
PROFESSIONAL
by
Qty: # 10
BACK
A
BACK
For information on Care and Cleaning or to Register your
SEQUOIA PROFESSIONAL product by highwood®, please visit
www.highwood-usa.com.
TOOLS INCLUDED
5/32" HEX KEY
1) With the Back and Seat on their sides, attach
one side of the Back to the Seat using two A
bolts.
2) Repeat on other side.
SEAT
A
ARM
LEG
SEAT
CM-CLASSQ01
08.05.22
PAGE 1 OF 1
A