(3)Installation time: About 45 minutes, 1-2 persons needed. (Installation time is difference as individual as person) (4)Installation instruction: Step 1: Remove the taillight cover by the Phillips Screwdriver. As shown on the RIGHT. Step 2: After “step 1”,then as shown on the RIGHT.
Page 3
Step 3: Install the bracket on the taillight,as shown below. Step 4: In this step,install one original bolt first,as shown below.
Page 4
Step 5: Install another 2 bolts.And tighten all the 3 original bolts. Step 6: Install the taillight cover with the 4 original screws one by one.
Page 6
1.The product parts in this instruction may differ slightly from the actual product contents but generally does not affect the installation of the product. 2.Please feel free to contact your distributor if you have any kind of question about your purchase. Hooke Road to find your parts...
Need help?
Do you have a question about the MMR.11737 and is the answer not in the manual?
Questions and answers