Related Manuals for HOOKE ROAD BXG.3006
Summary of Contents for HOOKE ROAD BXG.3006
- Page 1 BXG.3006 Side Steps BXG.3007 (1) Contents: a.1x Driver Side Step； b.1x Passenger Side Step; c.Attached bolts; (2) Tools required: a. 13mm Socket Wrench; b. 10mm Wrench;...
- Page 2 About 1 hour, 2-3 people may be needed. Installation time may differ according to your mechanical skill level. (PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION!) To view the electronic version (BXG.3006 & BXG.3007), please scan the QR code.
- Page 3 (4) Installation instruction: Step 1: Begin by removing the factory side step.Then ready to install the new side step. Step 2: Install the corresponding side step for the passenger side. The front end is longer than rear end as the picture shown. Long Short Insert the side step into the car frame.
- Page 4 Step 3: Then tighten the bolts on the three parts. You may have to lie under the chassis to screw the bolts.
- Page 5 Bolts are your Original Bolts.But if you don’t have it.Then use the attached bolts. Tighten all the bolts. Step 6: Repeat the operation for driver side. Step 7: Once you have everything in place you are finished with the installation.Congratulations on the purchase and installation of a quality Hooke Road product!
- Page 6 1.The product parts in this instruction may differ slightly from the actual product contents but generally does not affect the installation of the product. 2.Please feel free to contact your distributor if you have any kind of question about your purchase. Hooke Road to find your parts...